300832
10
Zoom out
Zoom in
Previous page
1/24
Next page
10
AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009
Deleting individual messages
While playback is paused, press the
˜ display key.
Deleting all old messages
During playback or pause:
MENU ¢ Delete all old ¢ OK (confirm the security
prompt)
Picking up a call from the answer machine
You can still accept a call while the answer
machine is recording the message by pressing
c .
Recording stops and you can speak to the caller.
Setting up the answer machine
The answer machine has already been preset at the
factory. Make individual settings using the hand-
set.
Details on how to set a delay time, after which the
an
swer machine is to answer a call, as well as
details on how to set the recording length and acti-
vate call screening during the recording, are avail-
able from the Menu tree
¢ page 15.
Setting a different language
You can change the language used for voice
prompts and the pre-recorded announcement.
MENU ¢ 4 3 9 2 1 (starts the procedure).
Select the language:
0 (German), 1 (French), 2 (Italian).
The display shows
Saved.
Assigning key 1 for fast access to the
answer machine (network mailbox)
Simply press and hold key 1 on the handset and
you will be connected directly to the answer
machine (network mailbox).
See Menu tree
¢ page 15.
Remote operation when on the move
You can check and activate your answer machine
from any other telephone (hotel, pay phone etc.).
Requirements:
You have set a system PIN other than 0000
¢ page 17.
The phone you are using for remote operation
has touch tone dialling (DTMF), i.e. you hear
different tones when you press the keys.
Calling the answer machine and playing back
messages
~
(Dial your own number) ¢ while listening to
your announcement: press the 9
key and enter the
system PIN
The following keys are used for operation:
Activating the answer machine
~
(Enter your own number and allow the phone to
ring until you hear the message: "Please enter PIN")
¢ ~
enter system PIN
Your answer machine is activated. It tells you how
much memory time is left. The messages are now
played back. The answer machine cannot be deac-
tivated remotely.
Locating a handset ("paging")
You can locate your handset using the base station.
Briefly press the registration/paging key on the
base station (
¢ page 1).
All handsets will ring simultaneously ("pag-
ing"), even if the ringer tones are deactivated.
End paging: br
iefly press the registration/paging
key on the base station (
¢ page 1) or the
talk key
c on a handset.
Registering handsets
You can register up to four handsets on your base
station (Gigaset AS18H/AS28H) recommended).
For automatic registration of handsets to
Gi
gaset AS180/AS185/AS280/AS285
¢ page 5.
Manual registration of handsets to Gigaset AS180/
AS185/AS280/AS285
1. On the handset: MENU ¢ Settings ¢ OK
¢ Handset ¢ OK ¢ Register HS ¢ Enter the sys-
tem PIN of the base station (default is 0000) ¢ OK.
Registering flashes in the display.
2. On the base station: wit
hin 60 seconds of
entering the system PIN, press and hold the regis-
tration/paging key (
¢ page 1) (min. 3 seconds).
Registration takes approx. 1 minute.
A
Go to the start of the current message.
Press twice to go back to the previous
mes
sage.
B
Stop playback. Press again to resume.
3
Skip to next message.
0
delete current message.
Please note:
Each
additional handset must be registered on
the base station in order for it to work properly!
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset as180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset as180 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset as180

Siemens gigaset as180 User Manual - Dutch - 16 pages

Siemens gigaset as180 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info