456675
6
Zoom out
Zoom in
Previous page
1/10
Next page
AS28H Handset / Israel EN / A31008-M2051-B501-1-VU19 / starting.fm / 19.02.2009
6
Initial charging and discharging of the batteries
The correct charge level can only be displayed if the batteries are first fully charged and
discharged.
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incoming calls,
and so that the alarm can be used.
MENU ¢ Settings ¢ OK ¢ Date/Time ¢ OK
¢ Date: ¢ ~ (enter the day, month and year in 6-digit format) ¢ OK
¢ Time: ¢ ~ (enter hours and minutes in 4-digit format) ¢ OK (display message: Saved)
¢ a (press and hold to return to idle status)
Display in idle status
Once the phone is registered and the time set,
the idle display is shown as in this example.
Activating/deactivating the handset
Press and hold the end call key a to activate or deactivate the handset.
If you place a deactivated handset in the base s
tation or charging cradle, it will automat-
ically activate.
Your phone is now ready for use!
If you have any questions about using your phone, please read the tips on troubleshooting
("Questions and answers"
¢ page 9) or contact our Customer Care team ¢ page 9.
Please note
After the first battery charge and discharge you may replace your handset in the
base station or charging cradle after every call.
Always repeat the charging and discharging procedure if you remove the batteries
from the handset and reinsert them.
The batteries may warm up during charging. This is not dangerous.
After a while, the charge capacity of the batteries will decrease for technical
reasons.
Please note
When entering the time and dat
e, you can move the position of an entry to the left
or right by pressing the control button up or down.
¤ Place the handset in the base station or charging cradle for
eight hours.
¤ Then remove the handset from the base station or charging cradle
and do not replace it until the batteries are fully discharged.
8 h
V
11.12. 11:56
INT MENU
6


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-gigaset-as-28h

Reset search

  • Sir, At my handset Incoming calls indicates by ringing but the sad part is that the incoming are not being displayed on the screen.
    Please help me/guide me.
    Thank you. Submitted on 16-11-2021 at 16:11

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset AS 28H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset AS 28H in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset AS 28H

Siemens Gigaset AS 28H User Manual - German - 16 pages

Siemens Gigaset AS 28H User Manual - Dutch - 16 pages

Siemens Gigaset AS 28H User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info