580074
3
Zoom out
Zoom in
Previous page
1/12
Next page
3
L1a / IM-NORD En / A31008-M2001-R201-1-9W19 / AL140_IM-NORD_EN.fm / 09.09.2008
Opening the battery cover
Press down on the battery cover below its upper
end
and slide the cover down.
Step 3: Registering the handset to
the base station and charging the
battery pack
Precondition: The handset must not already be
registered to a base station.
The handset is aut
omatically registered to the
Gigaset A140/AL145 base station. Place the hand-
set in the charging cradle of the base station with
it
s display facing forward. You will hear a confir-
mation tone. Leave the handset in the base station
u
ntil it is registered.
Automatic registration can take up to 5 minutes.
W
hile this is happening, Registering flashes in the
screen. The handset is assigned the lowest unas-
signed internal number (1–4). If several handsets
a
re registered on the base station, the internal
number is shown in the top left of the display after
registration, e.g. 2. If the internal numbers 1 to 4
h
ave already been assigned (four handsets have
already been registered), handset number four is
deregistered and overwritten.
Charging the battery pack
To charge the battery pack, leave the handset in
the base station for approx. 7 hours. The battery
pack is now fully charged. The charge status of the
battery pack is only correctly displayed after unin-
terrupted charging/discharging. Therefore you
sh
ould not interrupt the charging process.
Charging is electronically controlled to prevent
o
vercharging. The battery pack heats up during
charging. This is normal and not dangerous. After
a time its charge capacity will decrease for techni-
cal reasons.
You must set the date and time to ensure that the
times of
calls are logged correctly (see Menu tree
page 10).
Once the phone is registered
and the time set, the
idle display looks as shown on page 1.
If you have any questions about using your phone,
please r
ead the tips on troubleshooting ("Ques-
tions and answers", page 9) or contact our cus-
tomer service department (page 12).
Making calls
Making external calls and ending calls
External calls are calls using the public telephone
network.
~
(Enter the phone number) ¢c.
The number is dialled. (Or you can first pr
ess and
hold
c [dial tone] and then enter the number.)
During the call you can adjust the earpiece volume
using
t.
End the call/cancel dialling:
Press the end call key
a.
You can automatically insert a network provider
diall
ing code before any phone number (see
"Preselection" Menu tree, page 10).
Accepting a call
The handset indicates an incoming call by ringing
and by a display on the screen.
Press the talk key
c to answer the call.
When Aut
o Answer is activated (see Menu tree,
page 10), simply remove the handset from the
base station/charging cradle.
Calling Line Identification
When you get a call, the caller's number will be dis-
played on your handset; the caller's name will be
displa
yed if it is stored in the directory.
Preconditions:
1 You have asked your network provider for the
ca
ller's number (CLIP)to be displayed on your
ha
ndset screen.
2 The caller has asked the network provider for
hi
s number to be identified (CLI).
®
appears in the display if you have not
requested Calling Line Identification, Withheld
appears if the caller has withheld CLI, and Unavail-
able appears
if CLI has not been requested.
Operating the handset
Activating/deactivating the handset
Press and hold the end call key a.
If you place a deactivated handset in the base sta-
tion or charging cradle, it will automatically acti-
vate.
Please note:
If you have acquired additional handsets in this
G
igaset family or other Gigaset handsets, each
handset must be registered to your base station in
order for them to work properly, see also page 6!
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset AL140 quattro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset AL140 quattro in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset AL140 quattro

Siemens Gigaset AL140 quattro User Manual - Dutch - 14 pages

Siemens Gigaset AL140 quattro User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info