107685
10
Zoom out
Zoom in
Previous page
1/16
Next page
10
AL18X/AL28X/A38X / EN-Master / A31008-M2003-L101-1-7619 / main.fm / 10.10.2008
Remote operation when on the move
You can check and activate your answer machine
from any other telephone (hotel, pay phone etc.).
Preconditions:
You have set a system PIN other than 0000
¢ p. 16.
The phone you are using for remote operation
has touch tone dialling (DTMF), i.e. you hear
different tones when you press the keys.
Calling the answer machine and playing back
messages
~
(Dial your own number) ¢ while listening to
your announcement: press the 9
key and enter the
system PIN
The following keys are used for operation:
Activating the answer machine
~
(Enter your own number and allow the phone to
ring until you hear the message: "Please enter PIN")
¢ ~
enter system PIN
Your answer machine is activated. It tells you how
much memory time is left. The messages are now
played back. The answer machine cannot be deac-
tivated remotely.
Locating a handset ("paging")
You can locate your handset using the base station.
Briefly press the registration/paging key on the
base station (
¢ p. 1).
All handsets will ring simultaneously ("pag-
ing"), even if the ringer tones are deactivated.
End paging: brie
fly press the register/paging key
on the base station (
¢ p. 1) or the talk key c on
a handset.
Registering handsets
You can register up to four handsets to your base
station (Gigaset AL18H/AL28H) recommended).
For automatic registration of handsets to
Gigaset AL180/AL185/AL280/AL285, see
¢ p. 5.
Manual registration of handsets to Gigaset AL180/
AL185/AL280/AL285
1. On the handset: MENU ¢ Settings ¢ OK
¢ Handset ¢ OK ¢ Register HS ¢ Enter the sys-
tem PIN of the base station (default is 0000) ¢ OK.
Registering flashes in the display.
2. On the base station: wit
hin 60 sec. of entering
the system PIN, press and hold the registration/
paging key (
¢ p. 1) (min. 3 sec.).
Registration takes approx. 1 minute.
De-registering handsets
Handsets can only be de-registered by resetting
the base station to its default settings. This will
also reset every other setting
¢ p. 11.
If you have only registered handsets for other GAP-
compatible devices, these can only be de-regis-
tered with a hardware reset
¢ p. 11.
Using several handsets
Making internal calls
Internal calls are free calls to other handsets that
are registered to the same base station.
To make a call to other handsets, press
INT ¢ ~ (1...4, enter internal number of the
handset)
¢ OK, the handset is called or
INT ¢ star key P ¢ OK, all handsets are
called.
When a participant answers you can speak to
t
hem. To end the call, press
a.
Internal consultation call/connecting
a call
You are in conversation with an external partici-
pant. Press the
INT key and call one or all handsets.
The external participant hears the hold music.
Before the internal participant has answered,
press the end call key
a; the call is diverted to
the participant who answers the call.
After the internal participant has answered,
you can talk to him. Press the end call key
a;
the call is diverted, or press the display key
;
you are reconnected to the external participant.
A
Go to the start of the current message.
Press twice to go back to the previous
message.
B
Stop playback. Press again to resume.
3
Skip to next message.
0
Delete current message.
Please note:
Each additional handset must be registered on
the base station in order for it to work properly!
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset AL 285 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset AL 285 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset AL 285

Siemens Gigaset AL 285 User Manual - German - 16 pages

Siemens Gigaset AL 285 User Manual - Dutch - 16 pages

Siemens Gigaset AL 285 User Manual - French - 21 pages

Siemens Gigaset AL 285 User Manual - Italian - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info