504635
53
Zoom out
Zoom in
Previous page
1/69
Next page
51
Service (Customer Care)
Gigaset A510-A510A / GBR / A31008-M2202-L101-1-7619 / appendix.fm / 21.08.2014
Version 4, 16.09.2005
Questions and answers
If you have any queries about the use of
your telephone, visit our website at
www.gigaset.com/service
for assistance 24/7.
The table below also lists steps for trouble-
shooting.
The display is blank.
1. The handset is not activated.
¥ Press and hold the end call key a.
2. The battery is empty.
¥ Charge the battery or replace it
(¢ page 13).
"Base" flashes on the display.
1. The handset is outside the range of the base.
¥ Move the handset closer to the base.
2. The base's range is reduced because
Eco Mode is activated.
¥ Deactivate Eco Mode (¢ page 41) or
reduce the distance between the handset
and the base.
3. The base is not activated.
¥ Check the base power adapter
(¢ page 11).
4. Handset has not been registered with the
base or has been de-registered.
¥ Register the handset (¢ page 42).
The handset does not ring.
1. The ringtone is switched off.
¥ Activate the ringtone (¢ page 46).
2. The phone only rings if the phone number has
been transferred.
¥ Activate the ringtone for unknown calls
(¢ page 46).
You cannot hear a ringtone/dialling tone from
the fixed line.
The phone cord supplied has not been used or
has been replaced by a new cord with the wrong
pin connections.
¥ Please always use the phone cord supplied or
ensure that the pin connections are correct
when purchasing from a retailer (¢ page 57).
Each incoming call resets the date/time incor-
rectly.
The date and time are sent via e.g., your network
provider, a router or PABXs during calling line dis-
play. This data may be incorrect.
¥ Set the date/time correctly e.g., on the router
or PABX.
¥ Do not automatically copy the date/time
¢ page 17.
The connection always terminates after approx.
30 seconds.
Repeater activated/deactivated (¢ page 47).
¥ Activate/deactivate the handset (¢ page 22).
Error tone sounds after system PIN prompt.
You have entered the wrong system PIN.
¥ Reset the system PIN to 0000 (¢ page 48).
Forgotten system PIN.
¥ Reset the system PIN to 0000 (¢ page 48).
The other party cannot hear you.
You pressed the mute key v during a call. The
handset is "muted".
¥ Unmute the microphone (¢ page 29).
The number of the caller is not displayed
although CLIP has been set.
Calling Line Identification is not enabled.
¥ The caller should ask the network provider to
enable Calling Line Identification (CLI).
Refer to the notes on calling line display
¢ page 28.
You hear an error tone when keying an input.
Action has failed/invalid input.
¥ Repeat the process.
Watch the display and refer to the user man-
ual if necessary.
You cannot listen to messages on the network
mailbox.
Your PABX is set to pulse dialling.
¥ Set your PABX to tone dialling.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset A510A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset A510A in the language / languages: English as an attachment in your email.

The manual is 3,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset A510A

Siemens Gigaset A510A User Manual - German - 77 pages

Siemens Gigaset A510A User Manual - Dutch - 70 pages

Siemens Gigaset A510A User Manual - French - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info