504633

Siemens Gigaset A420A Manual

13
Zoom out
Zoom in
Previous page
1/24
Next page
13
Gigaset A420-A420A / Großbritannien / A31008-M2402-L101-1-7619 / Bali.fm / 04.08.2014
Template Bali, Version 1, 16.02.2012
Activating the answering machine
~ (Enter your own number and allow the phone to ring until you hear the message, "Please enter your PIN code.")
¤ ~
Enter system PIN
Your answering machine is activated. It tells you how much memory time is left. The messages are now played back. The
answering machine cannot be deactivated remotely.
Network mailbox
The network mailbox is the answering machine in your provider's telephone network. More information is available from
your provider. You cannot use the network mailbox unless you have requested it from your provider.
In order to use the network mailbox quickly and easily via the network mailbox list (¢ page 9), the menu (¢ page 22)
and to use fast access (¢ page 1), you will need to enter the number in your phone:
§Menu§ ¤ q Answer Machine ¤ §OK§ ¤ q Net Mailbox ¤ ~ (enter number) ¤ §OK§
Locating a handset (paging)
You can locate your handset using the base station.
¤ Briefly press the registration/paging key on the base station (¢ page 1).
All handsets will ring at the same time (paging), even if the ringers are switched off.
Ending paging: Briefly press the registration/paging key on the base station (¢ page 1) or press the talk key c or the
end call key a on the handset.
Registering handsets manually
You can register up to four handsets on your base station. Each additional handset must be registered on the base sta-
tion in order for it to work properly!
Registration takes approx. 1 minute. Once the registration process has been completed successfully, the display briefly
shows
HS registered and returns to idle status. Handsets are assigned the lowest available internal number (1-4). If the
internal numbers 1–4 are already assigned to other devices, the number
4 will be overwritten.
De-registering handsets
You can de-register all other registered handsets from each of the registered Gigaset handsets.
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q De-register HS ¤ q Select the internal party you wish to
de-register. The handset you are currently using is indicated by <.
¤ §OK§ ¤ Enter the base station system PIN (default
setting: 0000)
¤ §OK§
1) On the handset
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q Register HS ¤ Enter the base station system PIN (default
setting: 0000)
¤ §OK§ ¤ Registering is displayed.
2) On the base station
Within 60 seconds, press and hold the registration/paging key on the base station (¢ page 1) for approx. 3 seconds.
(A420A only: There is a tone played if the registration mode is activated.)
… 13 …


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-gigaset-a420a

Reset search

  • The manual says thet the call list can be set for either missed calls or the last 25 calls. How do I set it for the last 25 calls? Submitted on 25-8-2020 at 20:20

    Reply Report abuse

  • The manual says that the call list is either missed calls or the last 25 calls. How do I set it for the last 25? Submitted on 25-8-2020 at 20:18

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset A420A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset A420A in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset A420A

Siemens Gigaset A420A User Manual - German - 24 pages

Siemens Gigaset A420A User Manual - Dutch - 24 pages

Siemens Gigaset A420A User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info