458711
15
Zoom out
Zoom in
Previous page
1/24
Next page
15
A400/A400A / GBR / A31008-M2201-L101-3-7619 / main.fm / 19.06.2013
Specifications
Recommended batteries
Only use rechargeable batteries as described below.
Technology: Nickel-metal-hydride (NiMH)
Size: AAA (Micro, HR03)
Voltage: 1.2 V
Capacity: 400–800 mAh
The device is supplied with two approved batteries.
Base power consumption
General specifications
Questions and answers
If you have any queries about the use of your tele-
phone, visit our website at
www.gigaset.com/service
for assistance 24/7. The table below contains a list of
common p
roblems and possible solutions.
In standby mode
- Charged handset in base
- Handset not in base
approx. 0.7 W
< 0.4 W
During a call approx. 0.5 W
DECT standard Is supported
GAP standard Is supported
(The Gigaset handset is only fully
func
tional on Gigaset bases)
Range Up to 300 m outdoors
Up to 50 m indoors
Base power supply 230 V ~/50 Hz
Environmental condi-
tions in operation
+5°C to +45°C, 20% to 75% relative
hu
midity
Standby time 220 hours
Talktime 20 hours
Operating time for 1.5
hours
of calls per day
- Without Eco Mode+
- With Eco Mode+
135 hours
90 hours
Charging time in
cha
rger 5.5 hours
Problem Cause Solution
Nothing
appears in the
display.
The handset is not
switched on.
The batteries are
fla
t.
Press the end call key
a for approx.
5 seconds or pl
ace the
handset in the base.
Charge or replace the
batter
ies.
No wireless
connec
tion to
the base, Base
flashes in the
display.
The handset is out-
side the range of
th
e base.
The handset is not
re
gistered.
The base is not
switched on.
Move the handset
clos
er to the base.
Register the handset
¢ page 12.
Check the mains con-
nector on the base
¢ page 4.
You cannot
hear a r
inger
melody/dial-
ling tone from
th
e fixed line
network.
The phone cord
sup
plied has not
been used or has
been replaced by a
new cord with the
wrong pin connec-
tions.
Please always use the
phon
e cord supplied or
ensure that the pin
connections are cor-
rect when purchasing
fr
om a retailer: 3-4
assignment of tele-
phone leads/EURO
C
TR37.
Error tone
sou
nds after
system PIN
p
rompt.
PIN forgotten.
You have entered
the
wrong system
PIN.
Reset the system PIN to
the default setting
0000 ¢ page 13.
All handsets are de-
r
egistered. All settings
are reset. All lists are
deleted.
The connec-
tion always
ter
minates
after approx.
30 seconds.
Repeater acti-
vated/deactivated
¢ page 14.
Deactivate and
reac
tivate the handset
¢ page 7.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset A400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset A400 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset A400

Siemens Gigaset A400 User Manual - German - 16 pages

Siemens Gigaset A400 User Manual - Dutch - 24 pages

Siemens Gigaset A400 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info