298390
9
Zoom out
Zoom in
Previous page
1/16
Next page
Lombok A150/A150A/A250/A250A / UK-IE / A31008-M2702-L101-1-7619 / Lombok.fm / 22.08.2016
Version 4, 16.09.2005
9
Operating when on the move (remote operation)
You can check your answer machine from any other telephone (hotel, pay phone etc.).
Prerequisites:
You have set a system PIN other than 0000 ¢ page 16.
The phone you are using for remote operation has tone dialling (DTMF) i. e., you
hear different tones when you press the keys.
Calling the answer machine and playing messages
~ (Dial your own number.) ¤ When you hear your announcement, press 9 and
enter the system PIN.
The following keys are used for operation:
Activating the answer machine
~ (Enter your own number and allow the phone to ring until you hear the message:
"Please enter PIN")
¤ ~
(Enter system PIN)
Your answer machine is activated. It tells you how much memory time is left. The mes-
sages are now played back. The answer machine cannot be deactivated remotely.
Network mailbox
The network mailbox is the answer machine in your provider's telephone network.
More information is available from your provider. You cannot use the network mailbox
unless you have requested it from your provider.
In order to use the network mailbox quickly and easily via the network mailbox list
(
¢ page 7), the menu (¢ page 15) and to use fast access via key 1 (¢ page 1), you
will need to enter the number in your phone:
MENU
¤ u Answer Machine ¤ OK ¤ u Netw. Mailbox/Net Mailbox ¤ ~ (enter
number)
¤ OK
A
During the number/date/time announcement: Skip to the start of the previ-
ous message.
During the message playback: Skip to the start of the current message.
B
Stop playback. Press again to resume.
3
Go to the next message.
0
Delete current message.
Locating a handset ("Paging")
You can locate your handset using the base.
¤ Briefly press the registration/paging key on the base (¢ page 1)(¢ page 2).
All handsets will ring at the same time (“paging”), even if the ringers are switched off.
Ending paging: Briefly press the registration/paging key on the base
(
¢ page 1)(¢ page 2) or press the talk key or the end call key a on the handset.
Registering handsets manually
You can register up to four handsets to your base station. Each additional handset
must be registered on the base station in order for it to work properly!
Registration takes approx. 1 minute. Handsets
are assigned the lowest available inter-
nal number (1-4). If the internal numbers 1–4 are already assigned to other devices, the
num
ber 4 will be overwritten.
De-registering handsets
You can de-register all other registered handsets from each of the registered Gigaset
handsets.
MENU
¤ u Settings ¤ OK ¤ u Handset ¤ OK ¤ u De-register HS ¤ OK ¤ u
Select the internal party you wish to de-register. The handset you are currently using
is indicated by <.
¤ OK ¤ Enter the base system PIN (default setting: 0000) ¤ OK
1) On the handset
MENU
¤ u Settings ¤ OK ¤ u Handset ¤ OK ¤ u Register HS ¤ Enter the
base system PIN (default setting: 0000)
¤ OK ¤ Registering is displayed.
2) On the base
Within 60 seconds, press and hold the registration/paging key on the base
(
¢ page 1)(¢ page 2) for approx. 3 seconds.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset a250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset a250 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset a250

Siemens gigaset a250 User Manual - German - 44 pages

Siemens gigaset a250 User Manual - Dutch - 46 pages

Siemens gigaset a250 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info