298486
4
Zoom out
Zoom in
Previous page
1/13
Next page
2
Gigaset A245 / IM-eng / A31008-M1644-R101-2-7619 / Wyoming_AM.fm / 10.03.2005
Setting up the telephone for use
Step 1: Connecting the base
Connect the phone jack with the phone cord 1
and the mains units (230 V) with the power cord
2 as shown. Place the cords in the cord recesses.
The two cords must be plugged in at all times.
Use only the mains unit supplied (see the bot-
tom of the base).
If you ever purchase another phone cord from a
store, ensure that the phone conductors are cor-
rectly connected: 3-4 connection of the telephone
conductors/EURO CTR37.
3 Register/paging key
Step 2: Setting up the handset
Fitting the battery pack
Fit the plug into the socket.
Insert the battery (see diagram below).
Place the battery leads in the cable guides.
Closing the battery cover
Place the cover on the battery compartment as
shown in the diagram, then push it up until it clicks
into position.
Opening the battery cover
Press down on the battery cover below its upper
end and slide the cover down.
Step 3: Charging the battery pack
Charging the battery pack
To charge the battery pack, leave the handset in
the charging cradle for approx. five hours. The bat-
tery pack is now fully charged. The charge status of
the battery pack is correctly displayed only after
uninterrupted charging/discharging. You should
not therefore interrupt the charging process.
Charging is electronically controlled to prevent
overcharging. The battery pack heats up during
charging; this is normal and not dangerous. After a
time the charge capacity of the pack will decrease
for technical reasons.
You must set the date and time to ensure that the
times of calls are logged correctly (page 11). Your
telephone is now ready to use.
Activating/deactivating the handset
Press the 'end call' key a and hold.
If you place a deactivated handset in the charger, it
will automatically activate.
1
2
3
W
Place the battery leads in the cable
guides so that the battery cover cannot
catch on the leads and damage them
when it is closed.
Only insert the recommended re-
chargeable battery pack, i.e. never use a
normal battery pack as this could damage
your health and cause injury.
Never use non-Siemens battery charg-
ers as this could damage the battery pack.
Only place the handset in the charging
cradle that is intended for it.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset a245 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset a245 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset a245

Siemens gigaset a245 User Manual - German - 14 pages

Siemens gigaset a245 User Manual - Dutch - 13 pages

Siemens gigaset a245 User Manual - French - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info