300825

Siemens gigaset a240 duo 1 handsets Manual

5
Zoom out
Zoom in
Previous page
1/10
Next page
5
Gigaset A140/A240 / GBR / A31008-M1643-L101-1-7619 / Wyoming.fm / 16.08.2005
Registering and de-registering
handsets
You can register up to four handsets on your base
station.
A Gigaset A14/A24 handset that is not yet regis-
tered on a base is registered automatically. Other
handsets must be registered manually.
Automatic registering:
Gigaset handset A14/A24
Any Gigaset A14/A24 handset that is not registered
to a base can be registered automatically. To regis-
ter a handset for the first time, place it in the base
with the display facing forward. Registering takes
about 1 minute; a number of icons flash in the dis-
play. The handset is automatically assigned the
next available internal number (1–4). This number
appears in the top left of the display after success-
ful registering, e.g. "2". If all of the internal num-
bers 1 to 4 are used up (i.e. four handsets have
been registered), handset number 4 is de-regis-
tered and overwritten.
Manual registering:
Gigaset handset A14/A24
1. On the handset: MENU ¢ REGISTER HS ¢
enter your system PIN (default is 0000)
¢ OK.
The display shows
REGISTER HS during the regis-
tration procedure.
2. On the base: Within 60 sec. of entering the sys-
tem PIN, press the register/paging key on the front
of the base (page 1) and hold for approx. 3 sec.
The registration process starts.
Manual registering: Other handsets
Other handsets are registered as follows:
1. On the handset: Start to register your handset
as described in its operating instructions.
2. On the base: Press the register/paging key on
the front of the base (page 1) for approx. 3 sec.
The registration process starts.
De-registering handsets
You can de-register your Gigaset A14/A24 from the
base station as follows
INT¢ Select handset ¢ MENU ¢
DE-REG H/SET ¢ OK¢
Enter the system PIN (default is 0000) ¢ OK ¢
DE-REGISTER? ¢ OK ¢ a.
The internal number disappears from the de-regis-
tered handset. Handsets that have not been de-
registered retain their internal number.
Using several handsets
Internal calls
Internal calls are no-cost calls to other handsets
that are registered to the same base.
Internal conference/Call connecting
You are in conversation with an external caller.
To confer:
INT (the external caller hears the on hold mel-
ody)
¢ Select a handset ¢ c (confer with inter-
nal number).
End:
MENU ¢ GO BACK ¢ OK.
You are reconnected with the external caller.
Or to connect the call:
INT ¢ Select a handset ¢ c (announce the
call if required)
¢ a Press the end call key.
You can also press the end call key
a immedi-
ately (without announcing the call). If the internal
number does not answer or is busy the call will
come back to you automatically.
Barging in on an external call
You are conducting an external call. An internal
caller can 'barge in' on your call and join in the con-
versation (everybody hears a beep). Requirement:
The
BARGE IN function is activated.
Activating/deactivating internal barge-in
MENU ¢ BASE SET ¢ ADD FEATURES ¢
BARGE IN (‰ = on).
Internal barge-in
The display shows LINE IN USE. You wish to barge
in on the call.
c Press the talk key.
You are connected. Everyone hears a signal tone.
The display shows
LISTENING IN.
End:
a Press the end call key.
INT
Press the display key.
Your own handset is marked "<".
either ...
Call a single handset:
~
Enter number of handset,
e.g.
2.
or ...
Calling all handsets:
P
Press the star key.
... then
Ending the call:
a
Press the end call key.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset a240 duo 1 handsets at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset a240 duo 1 handsets in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset a240 duo 1 handsets

Siemens gigaset a240 duo 1 handsets User Manual - German - 11 pages

Siemens gigaset a240 duo 1 handsets User Manual - Dutch - 12 pages

Siemens gigaset a240 duo 1 handsets User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info