7879
32
Zoom out
Zoom in
Previous page
1/44
Next page
28
Appendix
Gigaset A200 / IM eng / A31008-A200-J101-2-7619 / appendix.fm / 12.06.2003
Appendix
Questions and Answers
What happens if … Possible cause Possible solution
… the display is blank? The handset is not
switched on.
The batteries are empty.
Press the end call key a for
approx. 5 secs.
Charge or replace batteries
(page 7).
… the handset doesn't react to
a key being pressed?
The keypad protection is acti-
vated.
Press the hash key
R for
approx. 2 secs (page 8).
… all the icons are flashing in
the display and there is no con-
nection with the base station?
The handset is outside the
range of the base station.
The handset has not been reg-
istered.
The base station is not
switched on.
The cable has not been cor-
rectly placed in the bottom of
the base station.
Reduce distance between
handset and base station.
Register handset (page 20).
Check power cable plug on
base station (page 5).
Check cable placement
(page 5)
… (where multiple handsets
are in use) the handset in the
base station is not charging?
Charging in the base station
only takes place when a phone
call is not being made at the
same time.
Use additional charger unit.
… the handset does not ring? The ringer is switched off.
The ringer volume has been
set to "0".
Call divert has been set on
AUTOMATIC.
Switch on (page 26) ringer.
Increase ringer volume
(page 26).
… the caller can't hear me? You've pressed the
INT key. As
a result the handset has been
"muted".
Activate the microphone again
with MENU, BACK, OK
(page 13).
… despite CLIP, the caller's
number is not displayed?
Sending the phone number
(CLI) has not been enabled.
The caller should request the
network operator to enable the
transfer of his or her phone
number.
… entries in the caller list don't
show time or date?
Date and time have not been
set.
Set date and time (page 11)
… I can't hear the ringer or dial-
ling tone?
You have changed the phone
cable on your Gigaset.
When buying a cable at a spe-
cialist shop make sure it has the
correct plugs (page 32).
… I can hear an error tone
(descending tone sequence)
when keying in?
The task has been unsuccessful
or the entry is faulty.
Repeat the process; watch the
display when doing so and if
necessary check with the oper-
ating manual.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset A200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset A200 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset A200

Siemens Gigaset A200 User Manual - German - 151 pages

Siemens Gigaset A200 User Manual - Dutch - 60 pages

Siemens Gigaset A200 User Manual - French - 151 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info