45923
9
Zoom out
Zoom in
Previous page
1/10
Next page
7
Gigaset A130/A230 / English / A31008-M1643-Z201-1-7619 / Wyoming.fm / 17.08.2004
Care
Wipe the base station and handset with a damp
cloth or an antistatic wipe. Never use a dry cloth!
This can cause static!
Contact with liquid
If the handset has come into contact with liquid:
1 Switch the handset off and remove the bat-
tery pack immediately.
2 Allow the liquid to drain from the handset.
3 Pat all parts dry, then place the handset with
the battery compartment open and the keypad
facing down in a dry, warm place for at least
72 hours (not in a microwave, oven etc.).
4 Do not activate the handset again until it is
dry.
When it has fully dried out you will normally be
able to use it again.
Questions and answers
If you have any queries about the use of your tele-
phone, go to
www.siemens-mobile.com/gigasetcustomercare
for assistance 24/7. The table below contains a list
of common problems and possible solutions.
Service (Customer Care)
We offer you support that is fast and tailored to
your specific needs!
Our Online Support on the Internet:
www.siemens-mobile.com/gigasetcustomercare
This site can be accessed at any time wherever you
are. It will give you 24/7 support for all our prod-
ucts. It also provides interactive troubleshooting, a
list of FAQs and answers plus operating instruc-
tions for you to download.
You will also find frequently asked questions and
answers in the Questions and Answers section of
this user guide.
Please have your record of purchase ready when
calling.
Replacement or repair services are not offered in countries
where our product is not sold by authorised dealers.
Problem Cause Solution
Nothing
appears in the
display.
The handset is not
switched on.
Battery pack is
flat.
Press the end call
key
a
for approx.
5seconds or place
the handset in the
base.
Charge/replace the
battery pack (page 2).
No response
to key press,
"HOLD KEY"
appears in the
display.
The keypad lock is
activated.
Press the hash key
R
for approx. 2 sec
(page 3).
No wireless
connection to
the base, dif-
ferent icons
flash in the
display.
The handset is
outside the range
of the base.
The handset is not
registered.
The base is not
switched on.
Cords not routed
correctly
Move the handset
closer to the base.
Register the handset
(page 4).
Check the power con-
nector at the base
(page 2).
Check cord routing
(page 2).
!
A31008-M1643-Z201-2-7619
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset A140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset A140 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset A140

Siemens Gigaset A140 User Manual - English - 10 pages

Siemens Gigaset A140 User Manual - German - 11 pages

Siemens Gigaset A140 User Manual - German - 11 pages

Siemens Gigaset A140 User Manual - Dutch - 10 pages

Siemens Gigaset A140 User Manual - Dutch - 9 pages

Siemens Gigaset A140 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info