504628
11
Zoom out
Zoom in
Previous page
1/16
Next page
Lombok / Großbritannien - Irland / A31008-M2401-L101-2-7619 / Lombok.fm / 11.08.2014
Version 4, 16.09.2005
11
Resetting the base using the key on the base
All handsets are de-registered and the system PIN is reset to the original code 0000.
Carry out the following steps: Remove the mains cable from the base. Hold down the
registration/paging key on the base (¢ page 1) and reconnect the power cable to
the base at the same time. Hold the key down for at least 5 seconds.
Operating the base station on the PABX/router
Operating on the router
When operating the Gigaset on an analogue port of a router you can reduce problems
with
echoes by activating the Echo mode (¢ page 15). If you have no problems with
echoes, this function should be deactivated.
Operating on the PABX
The following settings are only necessary when your PABX requires them; see the user
guide for your PABX.
When entering the digits, enter them slowly one after the other.
Changing the dialling mode
MENU ¤
P#Q5#1N
¤ The number for the set dialling mode flashes:
0 = touch tone dialling (DTMF); 1 = dial pulsing (DP) ¤ enter number ¤ OK.
Setting recall
MENU ¤
P#Q5#1Q
¤ The number for the current recall flashes:
0
= 80 ms; 1 = 100 ms; 2 = 120 ms; 3 = 400 ms; 4 = 250 ms; 5 = 300 ms; 6 = 600 ms;
7
= 800 ms ¤ enter number ¤ OK.
Changing pause after line seizure
You can set the length of the pause inserted between pressing the talk key and
sending the phone number.
MENU ¤
P#Q5#1L
¤ The number for the current pause length
flashes: 1 = 1 sec.; 2 = 3 sec.; 3 = 7
sec. ¤ enter number ¤ OK.
Changing the pause after the recall key
MENU ¤
P#Q5#12
¤ The number for the current pause length
flashes: 1 = 800 ms; 2 = 1600 ms; 3
= 3200 ms ¤ enter number ¤ OK.
b
Appendix
Entering letters/characters
Specifications
Batteries
Technology: Nickel-metal-hydride (NiMH); Size: AAA (Micro, HR03); Voltage: 1.2 V;
Capacity: 400 - 1000 mAh
General specifications
Standard
characters
Press the relevant key
the number of times
indicated.
Briefly press the hash
key
# to switch from
"Abc" to "123" mode,
from "123" to "abc"
mode and from "abc"
to "Abc" mode.
1) Space
1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 13x 14x 15x
1
1£$¥¤
2
abc2äáàâãç
I
def 3ëéèê
4
gh i4ïíìî
5
jkl5
L
mno6öñóòôõ
M
pqr s7ß
N
tuv8üúùû
O
wxy z 9ÿýæøå
Q
.,?!0+-:¿¡";_
P
*/()<=>%
#
#@\ &§
1)
DECT standard is supported
GAP standard is supported
Range up to 300 m outdoors, up to 50 m indoors
Base station power supply 230 V ~/50 Hz
Environmental conditions
in
operation
+5 °C to +45 °C, 20% to 75% relative humidity
Base station power consumption A120/A220 A120A/A220A
In standby mode
– Handset in base station
– Handset outside base station
ca. 1.0 W ca. 1.2 W
ca. 0.8 W ca. 1.0 W
During a call ca. 1.0 W ca. 1.2 W
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset A120A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset A120A in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset A120A

Siemens Gigaset A120A User Manual - German - 17 pages

Siemens Gigaset A120A User Manual - Dutch - 16 pages

Siemens Gigaset A120A User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info