298541
4
Zoom out
Zoom in
Previous page
1/16
Next page
Lombok / Großbritannien - Irland / A31008-M2401-L101-2-7619 / Lombok.fm / 11.08.2014
Version 4, 16.09.2005
4
Initial charging and discharging of the batteries
The correct charge status can only be displayed if the batteries are first fully charged
and discharged.
Please note
The handset is pre-registered with the base. If you have purchased a
model with multiple handsets, all handsets will already be registered
with the base. You do not need to register the handset again. The internal
handset number appears in the top left of the display, e.g.
1 (¢ page 1).
However, if a handset is not registered with the base (Register HS or Put
into base
is displayed), please register the handset manually (¢ page 9).
If you have purchased multiple devices, you can upgrade your Gigaset to
a cordless PABX by registering
all A120/A220 handsets at the same base
(¢ page 9).
After the first battery charge and discharge, you may place your handset
in the charger after every call.
Always repeat the charging and discharging procedure if you remove the
batteries from the handset and reinsert them.
The batteries may warm up during charging. This is not dangerous.
After a while, the charge capacity of the batteries will decrease for techni-
cal reasons.
6.5
h
¤ Charge the handset in the base for 6.5 hours.
¤ After charging, remove the handset from the
base and only replace it when the batteries are
fully discharged.
Please note
The handset must only be placed in the desig-
nated Gigaset base or charging cradle.
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incoming
calls, and so that the alarm can be used.
MENU ¤ u Settings ¤ OK ¤ Date/Time ¤ OK ¤ Date ¤ ~ (enter the day,
month and year in 6-digit format)
¤ OK ¤ Time ¤ ~ (enter hours and minutes in 4-
digit format)
¤ OK (display message: Saved)
¤ a (press and hold to return to idle status)
When entering the time and date, you can move the position of an entry to the left or
right by pressing the control key
u up or down.
Please note
If your phone receives the date and time during calling line display (e.g., via your
network provider, a router or PABXs), you can specify whether this data should be
copied to your phone:
¤ Press the key sequence: MENU ¤
P#Q5#MI
The following is displayed;
the current setting flashes:
¤ Press one of the following keys to specify, when this data should be copied to
your phone:
Q Never
or
1 Once, in case the date/time is not set on your phone
or
2 Always
Your selection is displayed (e.g. 2):
¤ Press the display key OK.
973 SET:
[
0
]
© Gigaset Communications GmbH 2014
All rights reserved. Subject to availability.
Rights of modification reserved.
www.gigaset.com
Issued by
Gigaset Communications GmbH
Frankenstr. 2a, 46395 Bocholt.
Germany
Version: 01.09.2014
A31008-M2401-L101-2-7619
*A31008-M2401-L101-2-7619*
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset a120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset a120 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset a120

Siemens gigaset a120 User Manual - German - 17 pages

Siemens gigaset a120 User Manual - Dutch - 11 pages

Siemens gigaset a120 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info