299017

Siemens gigaset 900 for 910 Manual

123
Zoom out
Zoom in
Previous page
1/196
Next page
123
Configuring phone settings via the Web configurator
Gigaset DE900 IP PRO / en / A31008-M2210-R101-3x-7619 / web_configurator.fm / 22.03.2011
Version 2, 27.05.2010
Saving settings
¤ Click on Save to save your settings on the QoS Settings screen.
VoIP settings
On this screen you configure the ports for establishing VoIP connections.
Settings
¢ Network and Connections ¢ VoIP Settings
"Listen ports" for VoIP connections
¤ Select the ports on which your phone expects incoming VoIP connections.
Use random ports
¤ Select Ye s if the phone should use any available ports for the SIP port and RTP port
instead of fixed ports.
The use of random ports is advisable if you want multiple phones to be operated on
the same router/gateway with NAT. The phones must then use different ports so that
the NAT for the router/gateway is only able to forward incoming calls and voice data
to one (the intended) phone.
¤ If you click on No, the phone uses the ports specified in SIP port and RTP port.
SIP port
Specify the local communication port that the phone should use to send and receive
signalling data. Specify a number between 1024 and 49152. The default port number
for SIP signalling is 5060.
RTP port
Specify the local communication port that the phone should use to receive voice data.
Enter an even number between 1024 and 49152. The port number must not be the
same as the port number in the SIP port field. If you enter an odd number, the next low-
est even number will be selected automatically (e.g., if you enter 5003, then 5002 is set
automatically). The default port number for voice transmission is 5004.
ICE enabled
Choose whether or not to use ICE (Interactive Connectivity Establishment). ICE is simi-
lar to STUN (
£ Page 109), a Session Initiation Protocol (SIP) method for overcoming
NAT firewalls.
Saving settings
¤ Click on Save to save your settings on the VoIP Settings screen.
… 123 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset 900 for 910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset 900 for 910 in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info