299017

Siemens gigaset 900 for 910 Manual

19
Zoom out
Zoom in
Previous page
1/196
Next page
19
First steps
Gigaset DE900 IP PRO / en / A31008-M2210-R101-3x-7619 / starting.fm / 22.03.2011
Version 2, 27.05.2010
Establishing a connection to the local network/WLAN
Your phone must be connected to the local network before it can connect to the Internet
and before you can operate it from a PC.
The device checks to see if a network connection already exists. The network connection
is automatically established if the phone has automatically been assigned an IP address
from a DHCP server in the network. If this is the case, the following screen will not appear
and you can skip to
£ Page 20.
If your phone has no network connection, you will need to configure the network manu-
ally. Depending on the type of network, you will need the following information about
the configuration:
u If the network uses IP protocol version 4 (IPv4) with a static IP address, you will need:
The device IP address, the network subnet mask, the IP addresses of the standard gate-
way and DNS server.
u If the network uses IP protocol version 6 (IPv6):
IP addresses automatically: select IPv6 as Network Type. The connection is then estab-
lished automatically.
IP addresses statically: the device IP address, the address prefix length and the DNS
server IP address.
u If you are using the wireless local network (WLAN), you will need:
The name of the WLAN with which you wish to connect the phone (SSID), network key
If there is still no network connection, you will then be asked whether you wish to config-
ure the connection manually.
¤ Select §§Yes§§ if you have the required information.
¤ Select §§No§§ if you want to use the display menu to configure the network at a later date
(£ Page 81).
Your device is now connected to the local network and can be configured for Internet
telephony.
Please note
The following network configuration is the default setting on your device: LAN with IP
protocol version 4 (IPv4) and DHCP.
If you selected §§Yes§§§, you can configure
the network immediately.
Depending on your selection, additional
screens may be displayed so you can
enter the required information.
More detailed information on LAN/
WLAN configuration can be found on
£ Page 81.
¤ Once you have configured the set-
tings, press the display key under
§§Save§§.
Local Network
Back Save
Network Type
IPv4
Activated Network:
LAN
IP Address Type:
Static
IP Address:
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset 900 for 910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset 900 for 910 in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info