504623
10
Zoom out
Zoom in
Previous page
1/34
Next page
g
i
gase
t
5030
/
IM
eng-
f
ra
/
A30350
-
M207
-
A801
-
5
-
5819
/
5030
_en.
f
m
/
25
.
2
.
11
10
GB
Automatic callback
If a dialled phone number is busy, you can activate
automatic call back. Your telephone rings as soon as the
line is free again. After the handset is lifted, the phone
number is dialled automatically
F ¢ Class Features ¢ CCBS
Activate or deactivate:
AB Select Activate or Deactivate.
Press the OK key.
Activating/deactivating automatic call back
In order for a caller to be able to use automatic call back on
your line while you are using the phone, you must activate
the function.
F ¢ Class Features ¢ Auto Recall
Activate or deactivate:
AB Select Activate or Deactivate.
Press the OK key.
PhoneMail
You can activate the answering service in the Belgacom
network (phone number 1230).
F ¢ Class Features ¢ PhoneMail
If you have received a new message, you will see a
(see page 9) on the display. You can listen to the message
stored by the network provider.
SMS (text messages)
Your unit is supplied prepared for sending SMS.
Requirements:
Calling Line Identification has been enabled for your
telephone connection.
Your country specific network provider supports SMS in
the fixed network (information on this and further
details can be obtained from your network provider).
You are registered with your service provider to send and
receive SMS.
Text messages are exchanged between SMS centres that
are operated by service providers. You must enter the
SMS centres through which you wish to send and receive
in your unit. Your text messages are sent via the SMS centre
that is entered as SMS MC Out (page 10).
If necessary, your text messages are received via the SMS
centre that is entered as SMS MC In.
Enter an SMS Centre (page 10).
Enter the text, see page 11.
Rules
An SMS can be up to 640 characters long. Some service
providers only support 608 or 612 characters, please
contact your service provider for information.
If there are more than 160 characters, the SMS is sent
as a linked SMS (up to 4 messages with 160 characters
each). Some service providers only support 152 or 153
characters, please contact your service provider for infor-
mation.
Please note:
If your phone is connected to a PABX, please read
page 13.
To receive text messages you must be registered with
your service provider.
Registering for SMS Service is only possible, when the
number of your service provider is entered under „SMS
MC Out“. As soon as you have registered, you may
change the number for the SMS centre.
If your service provider supports “SMS to e-mail“ and you
want to use this service, you have to make additional set-
tings. You obtain information about the settings from
your service provider.
Entering/changing SMS centres
To send an SMS you have to enter at least the phone number
of the send SMS centre.
To receive an SMS you might have to enter the number of
the centre for receiving SMS in some cases.
In case you want to switch to a different SMC centre, you
have to change the corresponding number(s).
In case the numbers for sending and receiving SMS are iden-
tical (see the table below), you need to enter the number for
„SMS MC Out“ only. So you may enter the number of a dif-
ferent service provider for „SMS MC In“ and receive SMS also
via this additional service provider.
You should find out about the services and special functions
offered by your service provider before you make a new
application and/or you delete preconfigured call numbers.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset 5030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset 5030 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset 5030

Siemens Gigaset 5030 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info