522449
87
Zoom out
Zoom in
Previous page
1/102
Next page
79
Appendix
Maintenance
Simply wipe the base station and handset with a damp cloth or an antistatic wipe.
Never
Never Never
Never use a dry cloth as this can cause static discharge.
Troubleshooting
If your telephone does not behave the way you want it to, first try to solve the prob-
lem using the following list.
Fault Possible cause Solution
No display Handset not activated Hold down end call key a
for 1 second
Batteries empty Charge or replace the batte-
ries (page 4)
No reaction to keystroke Keypad protection activated Hold down the
ª key for
1 second
No radio connection to the
base station – E.g. base sta-
tion 1 is flashing
Handset outside the base
station range
Move closer to the base sta-
tion
Handset not registered Register the handset
(page 56)
Base station not activated Check the connector at base
station (page 3)
Handset that is in the base
station is not charging
Line seized by a second
handset for a long period
Maximum charging power is
only possible while nobody
is making calls
Handset does not ring Ringer off Activate the ringer
Hold down the
« key
You cannot hear The key
F was pressed –
the microphone is “muted”
Press Î, to activate the
microphone
The incoming call number is
not displayed although Cal-
ler ID is set.
The telephone number
transmission is blocked
The callers must permit the
transmission of their tele-
phone numbers at their net-
work provider
The ringer/dialing tone
cannot be heard.
You have changed the tele-
phone cord on your Gigaset.
Ensure, when purchasing a
new cord, that it has the cor-
rect pin assignment (3-4 as-
signment of the telephone
leads/EURO CTR37).
Error beep is generated (de-
scending tone sequence)
Wrong input Repeat the procedure; note
the display and, if necessary,
refer to the operating in-
structions
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset 4215 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset 4215 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info