46716
99
Zoom out
Zoom in
Previous page
1/112
Next page
Frequently asked questions
97
I_KAP07.FM5
Gigaset 2060isdn, Inland:
8.12.98
A30853-X210-B101-1-19
Once the voice-call connection has been set up the subsequent characters are sent via the
D channel unless temporary DTMF dialing is activated, in which case the digits are sent as
DTMF characters in the B channel. This switchover is required for accessing external devices
such as answering machines, etc.
14. Gigaset 2060isdn behind a PBX
What are the important points with regard to operating a Gigaset 2060isdn on the S
0
bus of a
private branch exchange?
Behind a PBX, the Gigaset 2060isdn can access only the features supported by the PBX. In
contrast to the network provider, PBXs must sometimes interrupt the D channel (signaling
channel) so that features can be implemented by the PBX itself. The Gigaset 2060isdn trans-
mits only the protocol elements defined in the Euro-ISDN set, in other words it does not
transmit PBX-specific signaling in the D channel.
Example - conference feature: initiation of a conference is always interpreted as an internal
conference by the PBX, whereas the Gigaset 2060isdn acts as if it were connected to a cir-
cuit provided by the network provider.
Example - call forwarding: in the point-to-point mode PBXs usually implement call forwarding
themselves with a second B channel. These PBXs usually have multiple ISDN basic access-
es at their disposal. This arrangement is practical because call forwarding in the exchange
always applies to the entire access, irrespective of the number of B channels affected.
Call forwarding with the Gigaset 2060isdn behind PBXs works only when the PBX interprets
the protocol correctly.
15. Roaming
Roaming means searching for a user across all base stations of a multicell system. If a caller dials
the multiple subscriber number (MSN) of the mobile unit, all base stations are automatically
searched for the user in question. Only the base station at which the mobile unit is currently reg-
istered switches the connection.
The Gigaset 2060isdn supports roaming.
16. Handover
Handover is the automatic/semi-automatic transfer of existing external calls from one base sta-
tion to the next. This function ensures that mobile users can move freely throughout the entire
radio-coverage area of a multicell system, using their mobile units as they go.
The Gigaset 2060isdn supports handover as follows: If multicell operation is configured a range
warning tone sounds automatically as the user approaches the limit of a radio cell. The menu
offers the “CHANGE” function. The user has to confirm this function and the call is parked until
the mobile unit has registered with the new base station. The call is then handed over automat-
ically to the new station.
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset 2060isdn at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset 2060isdn in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset 2060isdn

Siemens Gigaset 2060isdn User Manual - German - 115 pages

Siemens Gigaset 2060isdn User Manual - Dutch - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info