668968
12
Zoom out
Zoom in
Previous page
1/94
Next page
10
Building Technologies A6V10393190_c_en_--
Fire Safety
2014-05-28
Testing the product operability
Prevent the remote transmission from triggering erroneously.
If testing building installations or activating devices from third-party companies, you
must consult with the appointed people.
The activation of fire control installations for test purposes must not cause injury to
anyone or damage to the building installations. The following instructions must be
observed:
Use the correct potential for activation; this is generally the potential of the
building installation.
Inform people before testing the alarm control devices and allow for possible panic
responses.
Inform people about any noise or mist which may be produced.
Before testing the remote transmission, notify the appropriate alarm and fault signal
receiving stations.
Modifications to the system layout and products
Modifications to the system and to individual products may result in faults, malfunctioning
and safety risks. Written confirmation must be obtained from Siemens and the
corresponding safety bodies for modifications or additions.
Modules and spare parts
Components and spare parts must comply with the technical specifications defined
by Siemens. Only use products specified or recommended by Siemens.
Only use fuses with the specified fuse characteristics.
Wrong battery types and improper battery changing lead to a risk of explosion. Only
use the same battery type or an equivalent battery type recommended by Siemens
(refer to Chapter 13).
Batteries must be disposed of in an environmentally friendly manner. Observe all
national guidelines and regulations.
Disregarding safety regulations
Before they are delivered, Siemens products are tested to ensure they function correctly
when used properly. Siemens disclaims all liability for damage or injuries caused by the
incorrect application of the instructions or the disregard of danger warnings contained in
the documentation. This applies in particular to the following damage or injury:
Personal injuries or damage to property caused by improper use and incorrect
application.
Personal injuries or damage to property caused by disregarding safety instructions
in the documentation or on the product.
Personal injury or damage to property caused by poor maintenance or lack of
maintenance.
Disclaimer
We have checked that the content of this document matches the hardware and software
described. Despite this, we cannot rule out deviations and therefore assume no liability
for them matching completely. The details in this document are checked regularly and
any corrections needed included in subsequent editions.
We are grateful for any suggestions for improvement.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens FC124-ZA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens FC124-ZA in the language / languages: English as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info