668967
64
Zoom out
Zoom in
Previous page
1/94
Next page
62
Building Technologies A6V10393190_c_en_--
Fire Safety
2014-05-28
7.2.4
User interface
Lamp test available at
access level 2
If selected, the lamp test function is only available at access level 2.
Otherwise it is available at access levels 1 and 2.
Silence key with
EVAC function
If selected, all sounder control lines can be activated by pressing
the button <Silence / resound> if access level 2 is achieved.
Silence on ACK
If selected, all sounder lines can be silenced by <ACK>.
ACK available at
access level 1
If selected, the button function <ACK> is available in access level 1
in addition to the access level 2.
LED fire brigade
activated by alarm
dialer output
If selected, the LED is activated when the output 'Alarm dialer' is
active. Otherwise, the LED is activated by general alarm.
LED fire brigade
activated via input
If selected, the LED is activated if the dialer device confirmation
signal is given.
Display view
Standard: Fulfills EN 54-2
UK only FC122: 4 zones without customer text are displayed.
7.2.5
Zone options
Device coincidence
inhibit time
The fire condition is achieved with the second detector activation in
the same zone only. The inhibit time, between the first and the
second activation can be set to from 15 to 60 seconds. The higher
the value, the more reliable the application.
7.2.6
Output options
Pulse time
Fire alarm: Select the time for switch on / off for the respective
outputs. Value range : On 0 - 3 sec. Off 0 - 5 sec.
Alert: Select the time for switch on / off for the programmed outputs.
Value range: On 0 - 3 sec. Off 0 - 5 sec.
Resound on new
alarm
If selected, the sounder line will resound with a new alarm.
7.2.7
Mains power
Fault delay time
Delay time for Mains power fault. Time delay up to 30 min.
selectable
in 5 min. steps.
Mains
power
Output
options
Zone
options
User
interface
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens FC123-ZA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens FC123-ZA in the language / languages: English as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info