668965
61
Zoom out
Zoom in
Previous page
1/94
Next page
59
* Options available depending on the selected mode.
This option is available in Alarm and Alert state.
Default on 0.5 sec. off 0.5 sec. Details see chapter 7.2.6.
7.1.3
Input
Configure the input parameters.
Select an input for programming.
Class change signal
Activate all sounder controls as long as the input is closed.
Dependency reset
Reset function is suppressed if the Alarm dialer is activated or if ACK
is not pressed before.
Level 2 access
Enables the access level 2 as long as the input is closed.
Disable dialer outputs
Disable fault and Alarm dialer as long as the input is closed.
Manned / unmanned
Switch to manned as long as the input is closed.
Toggle manned /
unmanned
Toggle between manned /
unmanned if the signal change on the input.
External PSU fault
Activate fault condition from the external PSU fault as long as the
input is closed.
Alarm dialer fault
Activate general fault and LED 'Alarm dialer fault' until reset.
Application remote transmission device is in fault state.
Dialer device
confirmation signal
Generate an event of 'Fire brigade is called' and is used to activate
outputs and the LED 'Fire brigade is called' as long as the input is
closed.
Activate alert mode
This mode (alert) supports that the output(s) is activated as long as
the input is closed.
Menu: Configure
Outputs
Activation condition
Alert by ext. input
ACK
Acknowledge all events if the input is activated.
SE ACK function
Acknowledge function is suppressed if the Alarm dialer is activated.
Reset
Reset function is always available independently of the access level.
If the mode 'Class change signal' is selected, you can edit the customer text.
See chapter 7.5.
It is not allowed to configure two or more inputs as 'Class change signal'.
*Customer
text
Mode
Input
1..n
Input
Pulse
time
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens FC121-ZA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens FC121-ZA in the language / languages: English as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info