788207
22
Zoom out
Zoom in
Previous page
1/52
Next page
en Wireless temperature sensor
22
Wireless temperature
sensor
Wi r el es s temper at ur e sensor
Connect the wireless cooking sensor to the control
panel before using the cooking sensor functions for the
first time.
Preparing and maintaining the wireless
temperature sensor
This section provides information on:
Attaching the silicone patch
Attaching the wireless cooking sensor
Cleaning
Replacing the battery
The silicone patch and temperature sensor can be
purchased from specialist retailers or through our
technical after-sales service or our official website. To
do this, quote the relevant reference number:
Adhering the silicone patch
The silicone patch attaches the wireless cooking sensor
to the cookware.
If you are using an item of cookware with cooking
sensor functions for the first time, attach the silicone
patch directly to it. Proceed as follows:
1. That the adhesive area on the pan is free from
grease. Clean the pan, dry it thoroughly and wipe the
adhesive area with a spirit.
2. Remove the protective film from the silicone patch.
Adhere the silicone patch to the outside of the pan in
the correct place using the enclosed template as a
guide.
3. Press down all over the surface of the silicone patch,
including in the centre.
The adhesive requires one hour to fully harden. Do not
use or clean the pan during this time.
Notes
Do not leave the pan with the silicone patch to soak
soapy water for long periods of time.
If the silicone patch comes off, attach a new one.
Fitting the wireless temperature sensor
Attach the temperature sensor to the silicone patch and
align it correctly.
Notes
Ensure that the silicone patch is completely dry
before attaching the cooking sensor.
Fill the pot so that the contents reach high enough to
cover the cooking sensor's silicone patch.
To prevent overheating, do not attach the cooking
sensor to other hot cookware.
Remove the cooking sensor from the pot after
cooking. Store it in a clean, safe place away from
sources of heat.
You can use up to three cooking sensors at the
same time.
Connecting the wireless temperature sensor
to the control panel
To connect the wireless temperature sensor to the
control panel, follow the instructions below:
1. Open the docking menu.
2. Open the basic settings and select "Cooking sensor"
from the menu.
3. Select the Add a new cooking sensor option.
Press the » symbol on the wireless temperature
sensor within 30 seconds.
After a few seconds, the status of the connection
between the temperature sensor and the control
panel will appear on the display.
The cooking sensor functions are made available once
the wireless cooking sensor has been connected to the
control panel correctly.
Notes
A faulty connection due to the wireless cooking
sensor not being detected may be caused by the
following:
Bluetooth communication error.
You did not press the symbol on the wireless
cooking sensor within 30 seconds.
The battery in the wireless cooking sensor is
almost flat.
Reset the wireless cooking sensor and repeat the
connection procedure.
If there are problems with the connection due to a
transmission error, repeat the connection procedure.
If you continue to experience connection problems,
contact our technical after-sales services.
00577921 Set of 5 silicone patches
HZ39050 Temperature sensor and set of 5 silicone patches
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EZ807KZY1E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EZ807KZY1E in the language / languages: English as an attachment in your email.

The manual is 4.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EZ807KZY1E

Siemens EZ807KZY1E User Manual - German - 52 pages

Siemens EZ807KZY1E User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info