788207
49
Zoom out
Zoom in
Previous page
1/52
Next page
Störungen, was tun? de
49
Demo-Modus
Wenn das Symbol ± im Display angezeigt wird, ist
der Demo-Modus aktiv. Das Gerät heizt im Demo-
Modus nicht. Trennen Sie das Gerät von der
Energieversorgung. Warten Sie ein paar Sekunden und
schließen Sie das Gerät wieder an. Deaktivieren Sie
dann den Demo-Modus in den Grundeinstellungen
innerhalb von 3 Minuten nach dem Anschalten.
Der Kochsensor ist kaputt/defekt. E8206 Den technischen Kundendienst benachrichtigen.
Die Anzeige des Kochsensors leuchtet nicht und der Kochsensor
reagiert nicht.
Die Batterie 3V CR2032 auswechseln. Siehe Kapitel ~ "Auswechseln der
Batterie"
Wenn das Problem bestehen bleibt, das Symbol am Kochsensor 8-10 Sekunden
lang gedrückt halten und den Kochsensor erneut mit dem Kochfeld verbinden.
Siehe Kapitel ~ "Den kabellosen Kochsensor mit dem Bedienfeld verbinden"
Wenn das Problem bestehen bleibt, den technischen Kundendienst benachrichti-
gen.
Die Anzeige am Sensor blinkt zweimal. Die Batterie des Kochsen-
sors ist fast verbraucht.Der nächste Garvorgang kann infolge
einer verbrauchten Batterie unterbrochen werden.
Die Batterie 3V CR2032 auswechseln. Siehe Kapitel ~ "Auswechseln der
Batterie"
Die Anzeige am Sensor blinkt dreimal. Die Verbindung zum Koch-
sensor ist abgebrochen.
Das Symbol am Kochsensor 8-10 Sekunden lang gedrückt halten und den Koch-
sensor erneut mit dem Kochfeld verbinden. Siehe Kapitel ~ "Den kabellosen
Kochsensor mit dem Bedienfeld verbinden"
Das Kochfeld kann keine Verbindung mit dem Heimnetzwerk
oder der Dunstabzugshaube herstellen. E7010 Das Kochfeld aus- und wieder einschalten.
Wenn die Anzeige erneut erscheint, den technischen Kundendienst benachrichti-
gen.
Die Betriebsspannung ist fehlerhaft und außerhalb des normalen
Betriebsbereichs. E9000/E9010 Den Stromanbieter benachrichtigen.
Das Kochfeld ist nicht richtig angeschlossen U400 Das Kochfeld vom Stromnetz trennen. Sicherstellen, dass Sie das Kochfeld gemäß
dem Schaltbild angeschlossen haben.
Problem Abhilfe
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EZ807KZY1E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EZ807KZY1E in the language / languages: German as an attachment in your email.

The manual is 4.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EZ807KZY1E

Siemens EZ807KZY1E User Manual - English - 52 pages

Siemens EZ807KZY1E User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info