788198

Siemens EX977KXX5E Manual

49
Zoom out
Zoom in
Previous page
1/60
Next page
en Hood connection
48
Connecting appliances via your home network
Use this type of connection if neither or one of the two
appliances is connected to the Home Connect app.
If the appliances are connected to each other via your
home network, you can use both the hood controls and
Home Connect to operate the hob.
Notes
■Make sure you follow the safety instructions in the
instruction manual for your extractor hood and that
these are complied with even when operating the
appliance via the hood controls on the
hob.~ "Important safety information" on page 6
■If the appliance is being operated by means of the
controls on the extractor hood, this mode of
operation always has priority. It is not possible to use
the hood controls on the hob during this time.
■In networked standby mode, your appliance requires
a maximum of 2 W.
Setting up
To set up the connection between the hob and the
extractor hood, the hob must be switched on.
Connecting directly
Make sure that the extractor hood is switched off.
For more information refer to the section entitled
"Connecting to the hob" in the instruction manual for
your extractor hood.
Note:
If you connect your hob directly to the extractor hood, it
cannot be connected to your home network as well and
you will not be able to use Home Connect.
1. Touch the e symbol in the docking menu to open
the basic settings.
2. Touch the "Hood control" setting.
3. Touch "Connect directly".
4. You have 2 minutes to initiate the connection
process on the extractor hood.
A message will be displayed to notify you when the hob
is successfully connected to the extractor hood. The
symbols for the hood controls on the hob are displayed
in the settings area.
Connecting via your home network
You require a router that has WPS functionality.
Access to your router is required. If you do not have
this, follow the steps listed under "Direct connection".
When you begin, make sure that the extractor hood is
connected to the same home network.
1. Touch the e symbol in the docking menu to open
the basic settings.
2. Touch the "Hood control" setting.
3. Touch "Connect to network".
4. Press the WPS button on the router within the next
2 minutes.
A message will be displayed to notify you when the
hob is successfully connected to your home
network.
5. You have 2 minutes to initiate the connection
process on the extractor hood.
A message will be displayed to notify you when the hob
is successfully connected to the extractor hood. The
symbols for the hood controls on the hob are displayed
in the settings area.
Note:
Connection can only be established when both
appliances are connected to your home network and
the connection process has been initiated for both of
them. If the time allowed for connecting has already
expired for one of the two appliances, initiate the
connection process again.
Disconnecting from the network
Di s connec t i ng f r om t he net wor k
You can reset the connections you have saved for your
home network and extractor hood at any time.
1. Touch the e symbol in the docking menu to open
the basic settings.
2. Touch the "Hood control" setting.
3. Touch "Disconnect".
The connection has been restored.
Control the hood via the hob
In the basic settings of your hob you can adjust the
behaviour of your extractor hood depending on the
switch-on/off of the hob or individual cooking zones.
~ "Hood control settings" on page 49
You can select other settings using the control panel.
Setting the fan
Activation
1. Touch the I symbol in the settings area.
The preset fan setting is shown on the display.
2. Select the fan setting you require.
Touch int 1 or int 2 to select one of the intensive
modes.
The fan has been activated.
Hood connection en
49
Deactivating
1. Touch the I symbol in the settings area.
2. Select fan setting 0.
The fan has been deactivated.
Setting automatic mode
Activation
1. Touch the I symbol in the settings area.
2. Select !.
Automatic mode is activated.
The fan starts automatically when steam is produced.
Deactivating
1. Touch the I symbol in the settings area.
2. Select fan setting 0.
Automatic mode is deactivated.
Setting the hood lighting
You can switch the hood light on and off via the hob's
control panel.
Touch the = symbol in the settings area.
Hood control settings
Hood cont r ol s et t i ngs
You can adapt the hood controls on the hob to suit your
needs at any time.
Note:
The settings will only be displayed if the appliance is
connected to an extractor hood.
Setting Description and options
Fan control (automatic start) If you wish, you can set the fan to start up after the hob is switched on, and you can configure the set-
tings depending on how you want the fan to run.
■Off – The hood will need to be switched on manually if needed.
■Switch on in automatic mode* – In automatic mode, the hood switches on when you switch on
any of the cooking zones.
■Switch on in standard mode – The hood is switched on at a fixed setting when you switch on any
of the cooking zones.
Fan run-on The fan run-on eliminates residual odours; the fan automatically switches off once this is complete.
■Fan off.
■Switch on in automatic mode.*
■Switch on with standard fan run-on.
■The fan settings cannot be adjusted when the hob is switched off.
Automatic light activation If you wish, you can set the hood light to automatically come on when the hob is switched on.
■Off
■On* – The light switches on when you switch on the hob.
Automatic light deactivation If you wish, you can set the hood light to automatically go out when the hob is switched off.
■Off*
■On – The light switches off when you switch off the hob.
Disconnect You can reset the connections you have saved for your home network and extractor hood at any time.
* Default setting when delivered
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EX977KXX5E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EX977KXX5E in the language / languages: English as an attachment in your email.

The manual is 6.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EX977KXX5E

Siemens EX977KXX5E User Manual - German - 60 pages

Siemens EX977KXX5E User Manual - Dutch - 60 pages

Siemens EX977KXX5E User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info