788198

Siemens EX977KXX5E Manual

17
Zoom out
Zoom in
Previous page
1/60
Next page
en Flex Zone
16
|Flex Zone
Fl e x Zone
You can use each flex zone as a single hotplate or as
two independent hotplates, as required.
It consists of four inductors that work independently of
each other. If using the flexible cooking zone, only the
area that is covered by cookware is activated.
Advice on using cookware
To ensure that the cookware is detected and heat is
distributed evenly, correctly centre the cookware:
As a single hotplate
The flexible cooking zone is activated as a single
hotplate.
Activation
1. Select the flexible cooking zone.
2. Select the heat setting you require from the settings
area. The heat setting and the indicator showing the
active cooking mode will be lit in the centre of the
flexible cooking zone.
The Flex cooking zone has now been activated.
To change the heat setting:
Select the flexible cooking zone and adjust the heat
setting to the setting you require in the settings area.
Adding new cookware
Place the new item of cookware onto the flexible
cooking zone and follow the instructions on the display
panel.
Note: If the cookware is moved to the hotplate being
used or lifted up, the hotplate begins an automatic
search and the heat setting selected previously is
retained.
Deactivating
Select the flexible cooking zone and set the heat setting
to 0. The flexible cooking zone will switch itself off and
the residual heat indicator will appear.
As two independent hotplates
Use the flexible cooking zone as two independent
hotplates.
Unlinking the two hotplates
Touch the ` symbol. The heat setting and the indicator
showing the active cooking mode will be lit at the
hotplate on which the cookware is placed.
The flexible cooking zone functions as two independent
hotplates.
Linking the two hotplates
Touch the ` symbol. The heat setting and the indicator
showing the active cooking mode will be lit in the centre
of the flexible cooking zone.
The flexible cooking zone functions as a single hotplate.
Notes
■If the hob switches itself off and then on again, the
flexible cooking zone is used as a single hotplate
again.
■To change the configuration settings for the flexible
cooking zone, refer to section ~ "Basic settings".
As a single hotplate
Diameter smaller than or equal to 13 cm
Place the cookware on one of the four posi-
tions that can be seen in the illustration.
Diameter greater than 13 cm
Place the cookware on one of the three
positions that can be seen in the illustration.
If the cookware takes up more than one
hotplate, place it starting on the upper or
lower edge of the flexible cooking zone.
As two independent hotplates
The front and rear hotplates each have two induc-
tors and can be used independently of each other.
Select the required heat setting for each of the
hotplates. Use only one item of cookware on each
hotplate.
Middle hotplate
Diameter smaller than or equal to 13 cm
Place the cookware on one of the three positions
that can be seen in the illustration.
Diameter greater than 13 cm
Place the cookware on one of the two positions
that can be seen in the illustration.
If the cookware occupies more than two induc-
tors, place it starting from the upper or the lower
edge of the hotplate.
Recommendations
If the hob has more than one flexible
cooking zone, place the cookware on
top so that it covers only one of the flex-
ible cooking zones.
Otherwise, the hotplates will not be
activated as intended and the cooking
result will not be satisfactory.
Move function en
17
uMove function
Move f unct i on
This function activates the entire flexible cooking zone,
which is divided into three cooking areas and which has
preset heat settings.
Only use one item of cookware. The size of the cooking
area depends on the cookware used and whether it is
positioned correctly.
This means that an item of cookware can be moved
during the cooking process to another cooking area
with another heat setting:
Preset power settings:
Front section = power setting 9.0
Middle section = power setting 5.0
Rear section = power setting è
The preset power settings can be changed
independently of one another. You can find out how to
change these in section ~ "Basic settings".
Notes
■If more than one item of cookware is detected on the
flexible cooking zone, the function is deactivated.
■If the cookware is moved within the flexible cooking
zone or lifted up, the hob automatically starts
searching and the heat setting of the area in which
the vessel was detected is set.
■You can find information on the size and positioning
of the cookware in the section on ~ "Flex Zone"
Activation
1. Select a hotplate from the flexible cooking zone.
2. Touch the active cooking mode.
3. Select the ÿ powerMove option.
This function has now been activated.
To change the heat setting:
The heat settings for the individual cooking areas can
be changed as you cook. Touch the symbol for the
cooking area you require and adjust the heat setting in
the settings area.
Note: If the function is deactivated, the heat settings for
the three cooking areas are reset to the preset values.
Deactivating
Select the cooking area and touch the Switch off button
in the settings area. The hotplate will switch itself off and
the residual heat indicator will appear.
This function has now been deactivated.
Cooking areas
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EX977KXX5E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EX977KXX5E in the language / languages: English as an attachment in your email.

The manual is 6.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EX977KXX5E

Siemens EX977KXX5E User Manual - German - 60 pages

Siemens EX977KXX5E User Manual - Dutch - 60 pages

Siemens EX977KXX5E User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info