788198
12
Zoom out
Zoom in
Previous page
1/60
Next page
en Operating the appliance
12
Cooking modes menu
The hob has a number of different cooking modes.
To navigate to the Cooking modes menu, select the
cooking zone and touch the active cooking mode.
Residual heat indicator
The hob has a residual heat indicator for each hotplate.
This indicates that a hotplate is still hot. Do not touch
the hotplate while the residual heat indicator f is still lit
or immediately after it goes out.
When the hotplate is switched off, the residual heat
indicator will light up. Even after the hob has been
switched off, the residual heat indicator will remain lit as
long as the hotplate is still warm.
1Operating the appliance
Oper at i ng t he appl i anc e
This chapter explains how to set a hotplate. The table
shows heat settings and cooking times for various
meals.
First-time use
When you switch on the appliance for the first time, the
menu for implementing the initial settings appears in the
display panel.
The main screen is then displayed.
Note: You can change the language and any other
setting at any time. You can find further information on
selecting the language in section ~ "Basic settings".
Switching the hob on and off
Switch the hob on and off using the main switch.
To switch on: Touch the # sensor. A signal sounds and
the touch display lights up. After a short switch-on time,
the hob will be ready for operation.
To switch off: Touch the # symbol until the indicator
beside the main switch goes out. The residual heat
indicator remains lit until the cooking zones have
cooled down sufficiently.
Notes
The hob automatically switches off if all cooking
zones have been switched off for more than
30 seconds.
The selected settings are stored for 10 minutes after
the hob has been switched off. If the hob is switched
back on within this time, the previous settings are
retained. Section ~ "Basic settings" contains
information about changing the time in which the
selected settings are saved.
Setting the cooking zone
Set the required power setting from 1 to 9.
Power setting 1 = lowest setting.
Power setting 9 = highest setting.
Each power setting has an intermediate level.
Notes
To protect the fragile parts of your appliance from
overheating and electrical overloading, the hob may
temporarily reduce the power.
In order to prevent the appliance from producing
excess noise, the hob may temporarily reduce the
power.
Cooking mode Function
Heat settings Allows you to select the heat setting for
the cooking zone.
» Cooking functions The wireless cooking sensor automati-
cally detects the temperature as cooking
progresses.
Note: This function will be ready to use
once the wireless cooking sensor is con-
nected to the control panel.
Õ Frying sensor The hob automatically detects the tem-
perature as frying progresses.
ÿ powerMove The temperature is adjusted by changing
the position of the cookware on the cook-
ing zones.
/ Dish assistant A preset list of dishes for braising and
boiling.
3RZHU
OHYHO
6ZLWFKRII
WLPHU

12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EX977KXX5E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EX977KXX5E in the language / languages: English as an attachment in your email.

The manual is 6.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EX977KXX5E

Siemens EX977KXX5E User Manual - German - 60 pages

Siemens EX977KXX5E User Manual - Dutch - 60 pages

Siemens EX977KXX5E User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info