788197
31
Zoom out
Zoom in
Previous page
1/44
Next page
en Power manager
30
hPower manager
Po we r manager
You can use the power manager to set the total power
of the hob.
The hob is preset at the factory. Its maximum
performance is specified on the rating plate. You can
use the power manager to change the value in
accordance with the requirements for the relevant
electrical installation.
In order not to exceed this set value, the hob
automatically distributes the power available between
the cooking zones that are switched on.
As long as the power manager function is activated, the
output of a cooking zone may temporarily fall below the
nominal value. If a cooking zone is switched on and the
power limit is reached, ¬ appears in the heat setting
display for a short time. The appliance automatically
regulates and selects the highest possible power level.
For more information about how the total power of the
hob is changed, see section ~ "Basic settings"
oHome Connect
Ho me Connec t
This appliance is WLAN-enabled and settings can be
sent to the appliance via a mobile device.
If the appliance is not connected to the home network,
the appliance functions in the same way as a hob with
no network connection. The hob can always be
operated via the control panel.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country.You can find more information on this at
www.home-connect.com.
Notes
Hobs are not designed to be used unattended - you
must always keep an eye on the cooking process.
Ensure that you follow the safety instructions in this
instruction manual and that these are also observed
when operating the appliance via the Home Connect
app. You must also follow the instructions in the
Home Connect app.~ "Important safety
information" on page 5
Using the Home Connect app, you can send settings
to your appliance and then have to confirm them on
the appliance. It is not possible to operate the
appliance whilst you are away from home.
Operation on the appliance always has priority.
During this time, it is not possible to operate the
appliance using the Home Connect app.
Setting up
To implement settings via Home Connect, you must
have installed and set up the Home Connect app on
your mobile device.
Observe the Home Connect documents supplied for
this.
Follow the steps specified by the app to make the
settings.
The app must be open in order to perform the setup
process.
Home Connect en
31
Automatic registration in the home network
You require a router that has WPS functionality.
You require access to your router.If you do not have
this, follow the steps for "Manually logging into your
home network".
1. Switch on the hob.
2. Touch and hold the 0 symbol for four seconds.
The product information is displayed.
3. Touch the 0 symbol repeatedly until the •’‚
setting appears.
lights up on the cooking position display.
4. Set the value in the control panel.
In the control panel, and the symbol D flash.
5. Press the WPS button on the router within the next
two minutes.
If the D symbol no longer flashes in the control
panel but, instead, lights up constantly, the hob is
connected to the home network.
Note:
If no connection can be established, the value ƒ
"Connect manually" appears. Manually log the
appliance into the home network or restart the
automatic connection.
The appliance automatically tries to connect to the
app and the setting •’ƒ is displayed. The value
flashes in the control panel.
6. Start the app on the mobile device and follow the
instructions for automatic network registration.
The registration procedure has been completed once
the value appears on the cooking position display.
Manual registration in the home network
1. Switch on the hob.
2. Touch and hold the 0 symbol for four seconds.
The product information is displayed.
3. Touch the 0 symbol repeatedly until the •’‚
setting appears.
lights up on the cooking position display.
4. Set the ƒ value in the control panel.
In the control panel, ƒ and the symbol D flash.
5. Use the "Home Connect" SSID and the "Home
Connect" key to log your mobile device into the hob
network.
If the D symbol no longer flashes in the control
panel but, instead, lights up constantly, the hob is
connected to the home network.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EX907LXV5E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EX907LXV5E in the language / languages: English as an attachment in your email.

The manual is 5.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EX907LXV5E

Siemens EX907LXV5E User Manual - German - 28 pages

Siemens EX907LXV5E User Manual - Dutch - 44 pages

Siemens EX907LXV5E User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info