Manual Siemens EX907LXV5E (page 15 of 44) (English)

788197

Zoom out

Zoom in

1/44

en Flex Zone

|Flex Zone

Fl e x Zone

You can use each flex zone as a single hotplate or as

two independent hotplates, as required.

It consists of four inductors that work independently of

each other. If using the flexible cooking zone, only the

area that is covered by cookware is activated.

Advice on using cookware

To ensure that the cookware is detected and heat is

distributed evenly, correctly centre the cookware:

As a single hotplate

The flexible cooking zone is activated as a single

hotplate.

Activating

1. Select the flexible cooking zone by touching the Ä

symbol.

2. Select the required heat setting from the settings

area.

The flexible cooking zone has now been activated.

Changing the heat setting

Select the hotplate and change the heat setting in the

relative settings area.

Adding a new item of cookware

Set the new piece of cookware down on the hotplate

and then touch the ý symbol twice. The new piece of

cookware will be detected and the heat setting that was

previously selected will be retained.

Note: If the cookware is moved to the hotplate being

used or lifted up, the hotplate begins an automatic

search and the heat setting selected previously is

retained.

Deactivating

Touch the ý symbol.

This deactivates the flexible cooking zone. The two

hotplates will now function independently.

As two independent hotplates

Use the flexible cooking zone as two independent

hotplates.

Disconnecting hotplates

1. Touch the ý symbol.

2. Select the required hotplate by touching the "

symbol.

3. Select the required heat setting from the settings

area.

The hotplate is activated.

Notes

■If the hob switches itself off and then on again, the

flexible cooking zone is used as a single hotplate

again.

■To change the configuration settings for the flexible

cooking zone, refer to section ~ "Basic settings".

Linking the two hotplates

Touch the ý symbol.

The flexible cooking zone has now been activated.

As a single hotplate

Diameter smaller than or equal to 13 cm

Place the cookware on one of the four posi-

tions that can be seen in the illustration.

Diameter greater than 13 cm

Place the cookware on one of the three

positions that can be seen in the illustration.

If the cookware takes up more than one

hotplate, place it starting on the upper or

lower edge of the flexible cooking zone.

As two independent hotplates

The front and rear hotplates each have two induc-

tors and can be used independently of each other.

Select the required heat setting for each of the

hotplates. Use only one item of cookware on each

hotplate.

Middle hotplate

Diameter smaller than or equal to 13 cm

Place the cookware on one of the three positions

that can be seen in the illustration.

Diameter greater than 13 cm

Place the cookware on one of the two positions

that can be seen in the illustration.

If the cookware occupies more than two induc-

tors, place it starting from the upper or the lower

edge of the hotplate.

Recommendations

If the hob has more than one flexible

cooking zone, place the cookware on

top so that it covers only one of the flex-

ible cooking zones.

Otherwise, the hotplates will not be

activated as intended and the cooking

result will not be satisfactory.

Move function en

uMove function

Move f unct i on

This function activates the entire flexible cooking zone,

which is divided into three cooking areas and which has

preset heat settings.

Only use one item of cookware. The size of the cooking

area depends on the cookware used and whether it is

positioned correctly.

This means that an item of cookware can be moved

during the cooking process to another cooking area

with another heat setting:

Preset heat settings:

Front area = heat setting Š

Middle area = heat setting †

Rear area = heat setting ‚.†

The preset heat settings can be changed independently

of one another. You can find out how to change these in

the section on ~ "Basic settings".

Notes

■If more than one item of cookware is detected on the

flexible cooking zone, the function is deactivated.

■If the cookware is moved within the flexible cooking

zone or lifted up, the hob automatically starts

searching and the heat setting of the area in which

the vessel was detected is set.

■You can find information on the size and positioning

of the cookware in the section on ~ "Flex Zone"

Activation

1. Select one of the two hotplates in the flexible

cooking zone.

2. Touch the ÿ symbol; it lights up more brightly. The

flexible cooking zone is activated as a single

hotplate.

The heat setting in the area in which the cookware is

located lights up in the hotplate display.

The function has now been activated.

Changing the heat setting

The heat settings for the individual cooking areas can

be changed during the cooking process. Set the

cookware down on the cooking area and change the

heat setting in the settings range.

Notes

■Only the heat setting in the area in which the

cookware is located is changed.

■If the function is deactivated, the heat settings for the

three cooking areas are reset to the preset values.

Deactivating

Touch the ÿ symbol. It lights up dimly.

The function was deactivated.

Note: If one of the cooking areas is set to ‹, the

function deactivates after a few seconds.

Cooking areas

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EX907LXV5E in the language / languages: English as an attachment in your email.

The manual is 5.31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EX907LXV5E

Siemens EX907LXV5E User Manual - German - 28 pages

Siemens EX907LXV5E User Manual - Dutch - 44 pages

Siemens EX907LXV5E User Manual - French - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens EX907LXV5E Manual

Product: