788206
12
Zoom out
Zoom in
Previous page
1/48
Next page
en Operating the appliance
12
1Operating the appliance
Oper at i ng t he appl i anc e
This chapter explains how to set a hotplate. The table
shows heat settings and cooking times for various
meals.
Switching the hob on and off
Use the main switch to switch the hob on and off.
When you first switch on the appliance, you are
prompted to set up your home network. The D symbol
lights up dimly for a few seconds on the display panel.
To begin setting up the connection, touch the
D sensor and proceed in accordance with the
information given in the section entitled ~ "Home
Connect". To exit initial set-up, touch any sensor.
To switch on the hob: Touch the # symbol. An audible
signal will sound. The ZoneLight lights for the cooking
zones switch on and the symbols light up on the control
panel that belong to the cooking zones, as well as the
functions which are available at this time. The hob is
ready to use.
To switch the hob off: Touch and hold the # symbol
until all the indicators go out. The residual heat
indicators in the control panel and on the cooking
zones will remain lit until the cooking zones have
cooled down sufficiently.
Notes
If the appliance has not been connected to your
home network or the connection has been broken,
network connection initial set-up will be activated
whenever you switch on the hob.
The hob will automatically switch itself off if the
cooking zones have been switched off for a few
seconds.
The settings are stored for 4 seconds after the hob
has been switched off. If you switch the hob back on
during this time, the hob will operate using the
stored settings.
Setting a hotplate
Set the desired heat setting in the settings area.
Heat setting 1 = lowest setting.
Heat setting 9 = highest setting.
Every heat setting has an intermediate setting. This is
marked with .
Note: The left-hand hotplates are set in the settings
area on the left and the right-hand hotplates are set in
the settings area on the right.
Notes
To protect the fragile parts of your appliance from
overheating and electrical overloading, the hob may
temporarily reduce the power.
In order to prevent the appliance from producing
excess noise, the hob may temporarily reduce the
power.
Selecting a hotplate and heat setting
The hob must be switched on.
1. Touch the " or Ä symbol for the cooking zone you
require.
The " or Ä symbol lights up more brightly.
2. Swipe your finger over the relative settings area until
the required heat setting lights up.
The heat setting is set.
Note: When you place a pot or pan on the Flex Zone,
the hob detects it and the hob is selected automatically.
You will find more information about the Flex Zone in
the section entitled ~ "Flex Zone".
Changing the power level
Select the hotplate and set the desired power level in
the programming zone.
Switch off the hotplate
Select the hotplate and set it to in the programming
panel. The hotplate turns off and the residual heat
indicator appears.
Notes
If there is no pot on the cooking zone, the selected
power level and the ZoneLight lights flash. After a
certain period of time, the cooking zone switches
itself off.
If you place a pot on the cooking zone before you
switch on the hob, this is detected within
20 seconds after you have touched the main switch,
and the cooking zone is automatically selected.
Once the pot is detected, select the power level
within 20 seconds, otherwise the cooking zone
switches itself off.
If you switch on the hob and place more than one
pot on it, the pots are detected, whereby the
ZoneLight lights for these cooking zones light up
and a cooking zone is selected automatically in the
cooking zone.
 
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EX878LYV5E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EX878LYV5E in the language / languages: English as an attachment in your email.

The manual is 5.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EX878LYV5E

Siemens EX878LYV5E User Manual - German - 28 pages

Siemens EX878LYV5E User Manual - Dutch - 28 pages

Siemens EX878LYV5E User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info