790751
20
Zoom out
Zoom in
Previous page
1/28
Next page
en Hob-based hood control
20
23  Hob-based hood control
If both appliances are HomeConnect-compatible, con-
nect the appliances in the HomeConnectapp. To do
this, connect the two appliances to HomeConnect and
follow the instructions in the app.
Notes
¡Using the controls on the extractor hood always
takes priority. It is not possible to use the hob-based
hood control during this time.
¡In networked standby mode, the appliance requires
a maximum of2W.
¡You can only connect to the extractor hood via the
HomeConnect app. Other connection routes are no
longer supported.
23.1 Resetting HomeConnectsettings
If you have problems connecting your appliance to the
WLAN home network (Wi-Fi) or if you want to log your
appliance onto a different WLAN home network (Wi-Fi) ,
you can reset the HomeConnect settings.
Note:If you reset the HomeConnect settings, the con-
nection to any extractor hood will also be terminated.
1. Press and hold ⁠ for 4seconds.
aThe display will show the product information.
2. Touch ⁠ repeatedly until the display alternately
shows ⁠ and ⁠ ⁠.
3. Set the value ⁠ on the control panel.
23.2 Controlling the extractor hood via the
hob
You can change the behaviour of your extractor hood
in the basic settings of your hob, depending on switch-
on/off of the hob or individual cooking zones.
You can select other settings using the controls on the
hob.
Setting the fan
1. Touch ⁠.
2. Select a fan setting on the control panel.
You can choose between the levels 1, 2 and 3.
To select an intensive setting, touch 4 or 5 on the
control panel. Alternatively, you can repeatedly
touch ⁠ until the required intensive setting is dis-
played.
Switching off the fan
Select the fan setting 0 on the control panel.
Switching on automatic mode
Press and hold ⁠ until the display shows ⁠.
aThe fan will start automatically when steam is pro-
duced.
Switching off automatic mode
Press and hold ⁠ until ⁠ goes out.
Automatic mode will also end if you select a differ-
ent fan setting.
Setting the hood lighting
You can switch the hood lighting on and off using the
control panel of the hob.
1. To switch the lighting on, touch ⁠.
2. To switch the lighting off, touch ⁠ again.
23.3 Overview of the hood control settings
In the basic settings for your hob, you can adjust the behaviour of your extractor hood depending on whether the hob
or individual cooking zones are switched on or off.
Setting Selection Description
⁠ ⁠ ⁠ Connection between hob and extractor hood
⁠ – Not connected/disconnected
⁠ – No function
⁠ – Connected to WLAN home network (Wi-Fi)
⁠ – Connected to WLAN and extractor hood
-
⁠ ⁠ ⁠ Automatic fan start-up
⁠ – Switched off. The extractor hood must be
switched on manually, if required.
⁠ – Switched on in automatic mode1. In automatic
mode, the extractor hood switches itself on when
one of the cooking zones is switched on.
⁠ – Switched on in manual mode. The extractor
hood is switched on at a specified setting when a
cooking zone is switched on.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
1Factory setting (may vary according to model)
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EX877NYV6E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EX877NYV6E in the language / languages: English as an attachment in your email.

The manual is 1.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EX877NYV6E

Siemens EX877NYV6E User Manual - German - 28 pages

Siemens EX877NYV6E User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info