790757
23
Zoom out
Zoom in
Previous page
1/28
Next page
Disposal en
23
Fault Cause and troubleshooting
The touchscreen dis-
play is not respond-
ing or has frozen.
The control panel is wet or an object is covering it.
Dry the control panel or remove the object.
The cooking zone's
power level cannot
be increased.
The hob's total power output has been limited.
Change the total power under "Maximum power consumption" in the basic settings.
If a very large item of cookware is being used, this may have an effect on the maximum
power level for that half of the hob. Place the cookware back on the hob.
Audible signal There is something on the touch display.
1. Remove the object and reconfigure the hob settings.
2. Do not place hot cookware on the control panel.
The hob is respond-
ing in an unusual
manner or can no
longer be operated
correctly.
A fault has occurred in the electronics.
1. Switch off the appliance using the mains fuse or the circuit breaker in the fuse box.
2. Wait a few seconds before reconnecting the appliance.
One or all cooking
zones have been
automatically
switched off.
The electronics have overheated and one or all of the cooking zones have been switched
off.
There is hot cookware in the vicinity of the control panel. The cooking zone has been
switched off to protect the electronics.
The cooking zone has overheated and has been switched off to protect the work surface.
The transfer settings
function cannot be
activated.
Electronics fault
Touch any button to confirm the fault display. You can continue to cook as normal
without using the flexMotion function. Contact customer service.
The FlexPlus cooking
zone cannot be activ-
ated.
Electronics fault
Touch any sensor to confirm the fault display. You can use the remaining cooking zones
to continue cooking. Contact the technical after-sales service.
⁠ ⁠ ⁠ ⁠ ⁠ The hob is unable to connect to your home network or the extractor hood.
1. Acknowledge the fault display by touching any of the sensor fields. You can cook as
usual without a connection.
2. If the problem persists, contact our technical after-sales service.
⁠ ⁠ ⁠ ⁠ ⁠/ ⁠ ⁠ ⁠ ⁠ ⁠ The operating voltage is incorrect and outside of the normal operating range.
Contact your energy supplier.
⁠ ⁠ ⁠ ⁠ The hob is not connected correctly.
Disconnect the hob from the mains. Connect the hob in accordance with the circuit dia-
gram.
The cooking zones
do not heat up, and
⁠ is displayed.
Demo mode is activated.
1. Disconnect the hob from the mains and, after a few seconds, reconnect it.
2. Deactivate demo mode in the basic settings within the next threeminutes.
26.3 Normal noises from your appliance
An induction hob may sometimes cause noises or vi-
brations, such as buzzing, crackling, hissing noises, fan
noises or rhythmic noises.
27  Disposal
27.1 Disposing of old appliance
Valuable raw materials can be reused by recycling.
1. Unplug the appliance from the mains.
2. Cut through the power cord.
3. Dispose of the appliance in an environmentally
friendly manner.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.
This appliance is labelled in accord-
ance with European Directive
2012/19/EU concerning used elec-
trical and electronic appliances
(waste electrical and electronic equip-
ment - WEEE).
The guideline determines the frame-
work for the return and recycling of
used appliances as applicable
throughout the EU.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EX875KYV1E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EX875KYV1E in the language / languages: English as an attachment in your email.

The manual is 1.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EX875KYV1E

Siemens EX875KYV1E User Manual - German - 28 pages

Siemens EX875KYV1E User Manual - Dutch - 28 pages

Siemens EX875KYV1E User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info