790955
45
Zoom out
Zoom in
Previous page
1/56
Next page
Hood connection en
45
Connecting via your home network
You require a router that has WPS functionality.
You require access to your router.If you do not have
this, follow the steps for "Direct connection".
When you begin, make sure that the extractor hood is
on your home network.
1. Touch the e symbol in the docking menu to open
the basic settings.
2. Touch the "Hood control" setting.
3. Touch "Connect to network".
4. Press the WPS button on the router within the next
2 minutes.
A message will be displayed to notify you when the
hob is successfully connected to your home
network.
5. You have 2 minutes to initiate the connection
process on the extractor hood.
A message will be displayed to notify you when the hob
is successfully connected to the extractor hood. The
symbols for the hood controls on the hob are displayed
in the settings area.
Note: Connection can only be established when both
appliances are connected to your home network and
the connection process has been initiated for both of
them. If the time allowed for connecting has already
expired for one of the two appliances, initiate the
connection process again.
Disconnecting from the network
Di sc onnect i ng from the net wor k
You can reset the connections you have saved for your
home network and extractor hood at any time.
1. Touch the e symbol in the docking menu to open
the basic settings.
2. Touch the "Hood control" setting.
3. Touch "Disconnect".
The connection has been restored.
Control the hood via the hob
In the basic settings of your hob you can adjust the
behaviour of your extractor hood depending on the
switch-on/off of the hob or individual cooking zones.
~ "Hood control settings" on page 46
You can select other settings using the control panel.
Setting the fan
Activation
1. Touch the I symbol in the settings area.
The preset fan setting is shown on the display.
2. Select the fan setting you require.
Touch int 1 or int 2 to select one of the intensive
modes.
The fan has been activated.
Deactivating
1. Touch the I symbol in the settings area.
2. Select fan setting 0.
The fan has been deactivated.
Setting automatic mode
Activation
1. Touch the I symbol in the settings area.
2. Select !.
Automatic mode is activated.
The fan starts automatically when steam is produced.
Deactivating
1. Touch the I symbol in the settings area.
2. Select fan setting 0.
Automatic mode is deactivated.
Setting the hood lighting
You can switch the hood light on and off via the hob's
control panel.
Touch the = symbol in the settings area.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EX801KYW1E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EX801KYW1E in the language / languages: English as an attachment in your email.

The manual is 5.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EX801KYW1E

Siemens EX801KYW1E User Manual - German - 60 pages

Siemens EX801KYW1E User Manual - Dutch - 56 pages

Siemens EX801KYW1E User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info