790961
50
Zoom out
Zoom in
Previous page
1/56
Next page
en Trouble shooting
50
Demo mode
If the ± symbol is shown on the display, demo mode
is active. The appliance does not heat up in demo
mode. Disconnect the appliance from the power
supply.Wait a few seconds before reconnecting the
appliance. Then deactivate demo mode in the basic
settings within 3 minutes of switching on the appliance.
The cooking zone has been operating continuously for an
extended period.
The automatic safety shut-off function has been activated. See the section entitled
The hob is unable to connect to your home network or the
extractor hood. “ˆ‹‚‹
Acknowledge the fault code by touching any of the buttons. You can cook as usual
without a connection.
If this code is displayed again, contact the technical after-sales service.
The cooking sensor has overheated and the cooking zone has
been switched off. “‰ƒ‹ƒ
Wait until the cooking sensor has cooled down sufficiently before activating the func-
tion again.
The cooking sensor has overheated and all the cooking zones
have been switched off. “‰ƒ‹„
If you are not using the cooking sensor, remove it from the cookware and keep it
away from the other cooking zones and sources of heat. Switch the cooking zones
back on.
The battery in the cooking sensor is almost drained. “‰ƒ‹… Replace the 3 V CR2032 battery. See the section entitled ~ "Changing the battery"
The connection to the cooking sensor has been broken.
“‰ƒ‹†
Switch the function off and then on again.
The cooking sensor is faulty. “‰ƒ‹‡ Contact the technical after-sales service.
The cooking sensor indicator will not light up and the cooking
sensor is not responding.
Replace the 3 V CR2032 battery. See the section entitled ~ "Changing the battery"
If this does not solve the problem, press and hold the symbol on the cooking sensor
for 8-10 seconds and then reconnect the cooking sensor to the hob. See the section
entitled
If the problem persists, contact the technical after-sales service.
The indicator on the sensor flashes twice. The battery in the
cooking sensor is almost drained. You may be interrupted the
next time you cook by the battery running out.
Replace the 3 V CR2032 battery. See the section entitled ~ "Changing the battery"
The indicator on the sensor flashes three times. The connec-
tion to the cooking sensor has been broken.
Press and hold the symbol on the cooking sensor for 8-10 seconds and then recon-
nect the cooking sensor to the hob. See the section entitled ~ "Connecting the
wireless temperature sensor to the control panel"
The operating voltage is incorrect/outside of the normal oper-
ating range. “Š‹‹‹/“Š‹‚‹
Contact your electricity supplier.
The hob is not connected properly —…‹‹ Disconnect the hob from the mains power supply. Make sure that it has been con-
nected as shown in the circuit diagram.
Problem Solution
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EX675JYW1E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EX675JYW1E in the language / languages: English as an attachment in your email.

The manual is 5.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EX675JYW1E

Siemens EX675JYW1E User Manual - German - 60 pages

Siemens EX675JYW1E User Manual - Dutch - 56 pages

Siemens EX675JYW1E User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info