790964
13
Zoom out
Zoom in
Previous page
1/32
Next page
Flex Zone en
13
|Flex Zone
Flex Zone
You can use the hob as a single hotplate or as two
independent hotplates, as required.
It consists of four inductors that work independently of
each other. If using the flexible cooking zone, only the
area that is covered by cookware is activated.
Advice on using cookware
To ensure that the cookware is detected and heat is
distributed evenly, correctly centre the cookware:
As a single hotplate
The flexible cooking zone is activated as a single
hotplate.
Activating
1. Select the flexible cooking zone by touching the Ä
symbol.
2. Select the required heat setting from the settings
area.
The flexible cooking zone has now been activated.
Changing the heat setting
Select the hotplate and change the heat setting in the
relative settings area.
Adding a new item of cookware
Set the new piece of cookware down on the hotplate
and then touch the ý symbol twice. The new piece of
cookware will be detected and the heat setting that was
previously selected will be retained.
Note: If the cookware is moved to the hotplate being
used or lifted up, the hotplate begins an automatic
search and the heat setting selected previously is
retained.
Deactivating
Touch the ý symbol.
This deactivates the flexible cooking zone. The two
hotplates will now function independently.
As two independent hotplates
Use the flexible cooking zone as two independent
hotplates.
Disconnecting hotplates
1. Touch the ý symbol.
2. Select the required hotplate by touching the "
symbol.
3. Select the required heat setting from the settings
area.
The hotplate is activated.
Notes
If the hob switches itself off and then on again, the
flexible cooking zone is used as a single hotplate
again.
To change the configuration settings for the flexible
cooking zone, refer to section ~ "Basic settings".
Linking the two hotplates
Touch the ý symbol.
The flexible cooking zone has now been activated.
As a single hotplate
Diameter smaller than or equal to 13 cm
Place the cookware on one of the four posi-
tions that can be seen in the illustration.
Diameter greater than 13 cm
Place the cookware on one of the three
positions that can be seen in the illustration.
If the cookware takes up more than one
hotplate, place it starting on the upper or
lower edge of the flexible cooking zone.
As two independent hotplates
The front and rear hotplates each have two induc-
tors and can be used independently of each other.
Select the required heat setting for each of the
hotplates. Use only one item of cookware on each
hotplate.
Recommendations
If the hob has more than one flexible
cooking zone, place the cookware on
top so that it covers only one of the flex-
ible cooking zones.
Otherwise, the hotplates will not be
activated as intended and the cooking
result will not be satisfactory.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EX601LXC1E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EX601LXC1E in the language / languages: English as an attachment in your email.

The manual is 5.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EX601LXC1E

Siemens EX601LXC1E User Manual - German - 24 pages

Siemens EX601LXC1E User Manual - Dutch - 64 pages

Siemens EX601LXC1E User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info