709330
5
Zoom out
Zoom in
Previous page
1/16
Next page
5
The hotplates
Residual heat indicator
The hob has a two-stage residual heat indicator for each
hotplate.
If appears in the display the hob is still hot. It may be used,
for example, to keep a small meal warm or to melt cooking
chocolate. As the hotplate cools down further, the display
changes to œ. The display remains lit until the hotplate has
cooled sufficiently.
Setting the hob
This section informs you how to set the hotplates. The table
shows heat settings and cooking times for various meals.
Switching the hob on and off
The main switch is used to switch the hob on and off.
To switch on: Touch the # symbol. An audible signal sounds.
The indicator light above the main switch and the displays
light up. The hob is ready for use.
To switch off: Touch the # symbol until the display light above
the main switch and the displays go out. All hotplates are
switched off. The residual heat indicator remains on until the
hotplates have cooled down sufficiently.
Notes
The hob switches off automatically if all hotplates have been
switched off for more than 20 seconds.
The settings remain stored for 4 seconds after the hob has
been switched off. If you switch it on again during this time,
the hob will operate using the previously stored settings.
Setting a hotplate
Use the + and - symbols to set the desired heat setting.
Heat setting 1 = lowest setting
Heat setting 9 = highest setting
There is an intermediate setting between each heat setting. This
is identified by a dot.
Set the heat setting
The hob must be switched on.
1. Touch the μ symbol to select the hotplate.
2. Touch the + or - symbol within the next 10 seconds. The
basic setting appears.
+ symbol: heat setting 9
- symbol: heat setting 4
3. To change the heat setting: touch the + or - symbol until the
desired heat setting appears.
Switching off the hotplate
Use the μ symbol to select the hotplate. Touch the + or -
symbol until appears. After about 10 seconds, the residual
heat indicator appears.
Notes
The last selected hotplate remains activated. You can set the
hotplate without selecting it again.
Hotplate temperature is regulated by the heat switching on
and off. The heat may also switch on and off at the highest
setting.
Table of cooking times
The following table provides some examples.
Cooking times and heat settings may vary depending on the
type of food, its weight and quality. Deviations are therefore
possible.
For bringing liquids to the boil, use heat setting 9.
Stir thick liquids occasionally.
Hotplate Connecting and disconnecting
$Single-circuit hotplate
ðDual-circuit hotplate Select the hotplate and touch the â symbol
çExtended cooking zone Select the hotplate and touch the â symbol
When the hotplate is connected: the corresponding indicator lights up. On appliances with multiple zone connection, the display
only lights up when the hotplate has been selected.
When the hotplate is switched on: the last selected size is automatically selected again
 
Ongoing cooking
setting
Ongoing cooking
time in minutes
Melting
Chocolate coating
Butter, honey, gelatine
1-1.
1-2
-
-
* Ongoing cooking without a lid
** Without lid
*** Turn frequently
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens ET845HH17 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens ET845HH17 in the language / languages: English as an attachment in your email.

The manual is 1.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens ET845HH17

Siemens ET845HH17 User Manual - German, Dutch, French, Italian - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info