530789

Siemens ET775FG17E Manual

10
Zoom out
Zoom in
Previous page
1/16
Next page
10
When the cooking time has elapsed
When the cooking time has elapsed, the hotplate switches off.
You will hear a signal and
‹‹ lights up in the display for 10
seconds. The
x indicator lights up brightly. Touch the 0
symbol. The displays go out and the audible signal ceases.
Changing or cancelling the cooking time
Select the hotplate and touch the
0 symbol. The x display
lights up brightly. Change the cooking time or set to
‹‹ in the
settings range.
Note: You can set a cooking time of up to 99 minutes.
Automatic timer
You can use this function to preselect a cooking time for all
hotplates. Each time a hotplate is switched on, the preselected
cooking then counts down. When the cooking time has
elapsed, the hotplate switches off automatically.
You can find out how to switch on the automatic timer in the
Basic settings section.
Note: You can change the cooking time for a hotplate or switch
off the automatic timer for the hotplates.
Select the hotplate and touch the
0 symbol. The desired x
display lights up brightly. Change the cooking time or set to
‹‹
in the settings range.
Kitchen timer
You can use the kitchen timer to set a time of up to 99 minutes.
It runs independently of all the other settings.
Switching on the kitchen timer
You can switch the kitchen timer on in 2 different ways:
■ If a hotplate has been selected, touch the 0 symbol twice
within 10 seconds.
■ If a hotplate has not been selected, touch the 0 symbol.
The
V display lights up.
Setting the kitchen timer
Set the desired time in the settings range.
When the cooking time has elapsed
After the time has elapsed, you hear an audible signal.
‹‹
lights up in the timer display. The
V display for the kitchen
timer lights up brightly. After 10 seconds, the display switches
off.
Displaying the time
Use the
0 symbol to select the kitchen timer. The time is
displayed for 10 seconds.
Changing the time
Use the
0 symbol to select the kitchen timer and reset the
time.
Automatic time limit
If a hotplate has been switched on for a long time without the
setting being changed, the automatic time limit is activated.
The hotplate stops heating.
” ‰ and the •/œ residual heat
indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
Wipe protection
If you wipe over the control panel while the hob is switched on,
settings may be altered.
To prevent this from happening, your hob has a control panel
pause function. Touch the
‚/$ symbol. A signal sounds. The
display light above the
‚/$ lights up. The control panel is
locked for 30 seconds. You can now wipe over the control
panel without altering any settings.
Note: The main switch is excluded from the control panel
pause function. You can switch off the hob at any time.
Energy consumption display
You can use this function to have the total energy consumption
between switching the hob on and off displayed.
Once switched off, the energy consumption in kilowatt hours
(e.g. 1.08 kWh) is displayed for 10 seconds
The accuracy of the display depends, amongst other things, on
the voltage quality of the power supply.
The display has not been activated. You can find out how to
activate the display in the Basic settings section.
"
N:K
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens ET775FG17E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens ET775FG17E in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens ET775FG17E

Siemens ET775FG17E User Manual - German, Dutch - 56 pages

Siemens ET775FG17E User Manual - Danish - 52 pages

Siemens ET775FG17E User Manual - French, Italian - 56 pages

Siemens ET775FG17E User Manual - Polish - 56 pages

Siemens ET775FG17E User Manual - Portuguese - 56 pages

Siemens ET775FG17E User Manual - Swedish - 52 pages

Siemens ET775FG17E User Manual - Turkish, Spanish - 56 pages

Siemens ET775FG17E User Manual - Norwegian, Finnish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info