790986
8
Zoom out
Zoom in
Previous page
1/16
Next page
en Accessories
8
5  Accessories
You can buy accessories from the after-sales service,
from specialist retailers or online. Only use original ac-
cessories, as these have been specifically designed for
your appliance.
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance. →Page12
You can find out which accessories are available for
your appliance in our catalogue, in the online shop or
from our after-sales service.
www.siemens-home.bsh-group.com
Accessories Description Use
Additional wok grid ¡Only use on the multi-crown burner.
¡Always use for cookware with a rounded
base.
¡Recommended in order to extend the ser-
vice life of the appliance.
Additional espresso maker
grid
¡Only use on the burner with the lowest
power setting.
¡Use with cookware with a diameter smal-
ler than 12.
Simmer plate ¡For cooking on a low heat.
¡Use the economy burner or the standard-
output burner. If there are several stand-
ard-output burners, it is preferable to use
the rear or front-right burner.
¡Place it on the pan support with the
bumps facing up – never place it directly
on the burner.
6  Basic operation
6.1 Igniting a gas burner
The hob has automatic ignition of the burners.
WARNING‒Risk of fire!
Escaping gas may ignite.
If the burner does not ignite after 15seconds, turn
the control knob to the "Off" position and open the
door or window in the room. Wait at least one
minute before igniting the burner again.
In the event of the burner flames being accidentally
extinguished, turn off the burner control and do not
attempt to re-ignite the burner for at least one
minute.
ATTENTION!
If you turn the control knob directly between position
and1, malfunctions may occur.
For this reason, never turn directly from position
to position 1 or vice versa.
1. Press the control knob for the selected burner and
turn it anti-clockwise to the highest level.
Keep the control knob pressed in.
aFor all of the burners, sparks are generated and the
flame ignites.
2. Wait a few seconds and release the control knob.
→"Safety system", Page8
3. Turn the control knob to the required position.
4. If the burner does not ignite, turn the control knob to
the off position and repeat the steps described
above. This time, hold the control knob down for
longer (up to 10 seconds).
Note:
Take the following information into account to ensure
that the appliance works correctly:
¡The burner parts →Page7 and the pan supports
→Page7 must be inserted correctly.
¡Do not swap the burner caps around.
¡It is important to keep the appliance clean. Clean
the ignition plugs regularly with a small, non-metallic
brush. Take care to prevent the ignition plugs from
suffering any heavy knocks.
¡The burner holes and grooves must be clean to en-
sure a correct flame.
→"Cleaning the burners", Page10
6.2 Safety system
The safety system (thermocouple) interrupts the flow of
gas if the burners accidentally go out. To ignite the
burner, you must activate the system that enables the
gas flow.
1. Ignite the burner without releasing the control knob.
aThe flame ignites.
2. Press and hold the control knob for a further four
seconds.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens ER6A6PB70D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens ER6A6PB70D in the language / languages: English as an attachment in your email.

The manual is 9.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens ER6A6PB70D

Siemens ER6A6PB70D User Manual - German, French, Italian - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info