332599
8
Zoom out
Zoom in
Previous page
1/86
Next page
The gas burners
Fig. 1.
to light, so you should keep them as clean as possible. Clean
them using a small brush, and remember that the ignition
sparkers must be treated very gently.
If your cooking hob is not fitted with this automatic lighting
feature, use a lighter or a match to light the burner.
Your hob may be fitted with safety thermocouples which
prevent gas from being released if the burners are accidentally
turned off. Fig. 2.
To turn on and activate this innovative system, proceed in
the same way, but keep the control pressed down until it comes
on, with the flame appearing and staying lit.
If the burner does not light, repeat the procedure but this time
hold the knob pressed in for 1-5 seconds.
To turn it off, turn the control to the right to the position .
When doing this, the ignition system may work again - this is
completely normal.
The modern functional cooking hob you have purchased has
progressive taps fitted which allow you to adjust the flame to
the desired heat.
The large double flame burner is highly practical and suitable
If your hob has a large double flame burner, it will have a tap
fitting that will enable you to control the inner and outer flames
separately. This revolutionary system allows you to choose
from a wide range of powers. Operating description Fig. 3.
When you are using this gas appliance, it will make the kitchen
hot and humid, and therefore you must ensure that the kitchen
is well ventilated. Keep all the natural sources of ventilation
open, or install a mechanical ventilation device (such as an
extractor fan). If your appliance is in continual use, you may
require supplementary ventilation, such as an open window
(while avoiding draughts) or you may need to increase the
power of any mechanical system.
Fig. 1
Fig. 2
Sparker
Thermocouple
íÜêáåÖëååÉê~åÇ çìíÉêF
Äìêå ~íÑìää éçïÉêK
qÜÉ çìíÉê êáåÖ Äìêåë ãáåáãìã
éçïÉêI íÜÉ áååÉê êáåÖ Äìêåë
ÑìääéçïÉêK
qÜÉ áååÉê êáåÖ Äìêåë Ñìää éçïÉêI
íÜÉ çìíÉê êáåÖ áëíìêåÉÇ çÑÑK
qÜÉ áååÉê êáåÖ Äìêåë ãáåáãìã
éçïÉêI íÜÉ çìíÉê êáåÖ áë íìêåÉÇçÑÑK
Fig. 3
6
it pressed in this position until the burner flame is lit.
Sparks are produced in this control position in all burners.
Turn the control to the desired position (you no longer
need to press the control).
To switch on the burner, press the appropriate burner
If the burner does not ignite, repeat the procedure and
All of the operating controls show which burner they control.
keep the control pressed for longer this time (up to a
maximum of 10 seconds).
control and turn it to the left to the highest position; keep
If the ignition sparkers are dirty, this makes the burner harder
When being used for the first few times, it may produce a
for cooking with paella pans, woks, etc.
slight smell.
An orange-coloured flame is normal and it is produced in
the presence of dust in the atmosphere, spillages, etc.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens er 947501 inox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens er 947501 inox in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info