69702
14
Zoom out
Zoom in
Previous page
1/29
Next page
Troubleshooting
...if none of the electrical
system works?
-Faulty fuse. -Check the fuse in the
main fuse box and
-The automatic circuit breaker
or mains differential has been
triggered.
-Check to see if the circuit
breaker or a differential has
been triggered in the mains
...if the electric ignition system
does not work?
-There may be food or cleaning
product particles between the
spark plugs and the burners.
-The burners are wet. -Dry the burner covers and
spark plugs carefully.
-Check that the covers
have been put in the
proper position.
-The covers on the burners are
not in the right position.
...if the flame on the burners is
not evenly distributed?
-The burner components have
not been assembled properly.
-The gas outlets on the burners
are dirty.
-Put the components in their
correct positions.
-Clean the gas outlets on the
burners.
...if the gas flow does not seem
normal or there is no gas flow
at all?
-The gas flow has been cut at
an intermediate stopcock.
-If the gas is supplied from a
gas bottle, it may be empty.
- Open any intermediate
stopcocks.
-Replace the gas bottle with
a full one.
...if the kitchen smells of gas? -One of the valves has been
left open.
-Possible leak on the gas bottle
coupling.
-Check to see if a valve has
been left open.
-Check that the coupling on
the gas bottle is in order.
What´s wrong
Possible cause Solution
-The gap between the spark
plug and the burner needs to
be cleaned carefully.
It is not always necessary to call the Service Centre. In
some cases, you may be able to solve the problem
yourself. This table contains some useful information.
Important information:
Only authorised personnel from our Service Centre are
qualified to work on the main gas and electric systems.
...if the safety devices on the
different burners do not work?
-The control knob has not been
kept pressed in for long
enough.
-The outlets on the burners are
dirty.
-Once ignited, keep the
control knob pressed in for
a few seconds.
-Clean the gas outlets on the
burners.
replace it if it is faulty.
supply box.
13
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens ER 14253 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens ER 14253 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info