Service programmes en
61
■ For cleaning and descaling only use
the tablets intended for such. The
tablets were specially developed for
this appliance and new stocks can
be ordered through customer
service. ~ "Accessories"
on page 43
■ Never insert descaling tablets or
other media into the grounds
compartment.
■ Never interrupt the service
programme.
■ Prior to starting a service
programme, remove, clean and
re-insert the brewing unit. Rinse the
milk system.
■ At the end of a service programme,
wipe down the appliance using a
soft, damp cloth to immediately
remove any descaler residue. This
residue may cause corrosion to
form.
■ New sponge cloths may contain
salts. Salts can cause rust film on
stainless steel and must therefore be
washed out thoroughly before use.
■ If one of the service programs is
interrupted, e.g. by a power outage,
proceed as follows:
The appliance automatically starts a
special rinsing.
1. Rinse out the water tank.
2. Pour in fresh still water up to the
"max" marking and confirm.
The programme starts and rinses the
appliance. Duration: approx.
2 minutes.
3. Empty, clean and re-insert the drip
tray.
4. Empty, clean and re-insert the milk
container.
The programme has finished. The
appliance is ready for use again.
5. Press the $/± button to exit the
programme.
Rinse milk system
The milk system is automatically
cleaned with a short jet of steam directly
after preparing a milk drink.
For particularly thorough cleaning, the
milk system can be additionally rinsed
with water.
Duration: approx. 2 minutes
1. Press the $/± button to open the
menu.
2. Use the rotary selector to select
"Rinse milk system".
3. Press the rotary selector to start the
programme.
4. Empty, clean and re-connect the milk
container.
5. Place an empty glass under the
outlet system and confirm.
The programme runs.
6. Empty, clean and re-connect the milk
container.
7. Empty the glass.
The programme has finished. The
appliance is ready for use again.
8. Press the $/± button to exit the
programme.
The milk system should also be subject
to thorough manual cleaning at regular
intervals. ~ "Cleaning the milk system"
on page 59
Descaling
Duration: approx. 21 minutes
The line at the bottom of the display
indicates in how many minutes the
water tank will need to be rinsed and
refilled with water, for example.
1. Press the $/± button to open the
menu.
2. Use the rotary selector to select
"Descale".
3. Press the rotary selector to start the
programme.
