528366
23
Zoom out
Zoom in
Previous page
1/160
Next page
19
en
Before starting the respective service
programme (descaling, cleaning or
calc‘nClean), remove the brewing unit,
clean as instructed and replace.
Specially developed and suitable descal-
ing and cleaning tablets are available
from retailers or customer service.
Accessories Ordering number
Retail Customer
service
Cleaning
tablets
TZ60001 310575
Descaling
tablets
TZ60002 310967
Cleaning the milk system
Duration: approx. 1 minute
Cleaning and service
Short rinse
milk system
start
calcnClean
The milk system 10 can be pre-cleaned
automatically.
Press the à button 3.
Short rinse milk system
start
Press the start button 8.
Place glass under frother, place
suction pipe in glass
start
Place an empty glass under the milk
system 10 and put the end of the pipe
10d in the glass.
Press the start button 8. The milk system
is cleaned automatically.
Now empty the glass and clean the
suction pipe 10d.
In addition to this, clean the milk system
thoroughly at regular intervals (by hand or
in the dishwasher).
Descaling
Duration: approx. 30 minutes.
Cleaning and service
Descale
start
Clean
The start button 8 ashes while the different
descaling processes are running.
The gures on the top right indicate the
progress of the programme.
Important: If there is a water lter in the
water tank 11, it needs to be removed
before the service programme is run.
Press the à button 3.
Descale
start
Press the start button 8; the display 5 will
guide you through the programme.
Empty drip tray
Replace drip tray
Empty the drip tray 23 and reinsert it.
Place 1 l container
Place suction pipe in container
start
Place a container with 1 litre capacity
under the milk frother 10.
Place the end of the suction pipe 10d in
the container.
Press the start button 8.
Remove filter
start
Info: If the water lter is activated, the dis-
play will prompt you to remove the lter,
then press the start button 8 again.
TE803_806_1RW.indb 19 08.05.2013 14:24:14
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EQ8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EQ8 in the language / languages: English, Dutch, French, Polish as an attachment in your email.

The manual is 14,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EQ8

Siemens EQ8 User Manual - German, Italian - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info