610513
10
Zoom out
Zoom in
Previous page
1/168
Next page
6
en
Before using for the
rst time
General
Fill the appropriate container using only
pure, cold, uncarbonated water and only
roasted beans (preferably espresso or cof-
fee bean blends for fully automatic coffee
machines). Do not use coffee beans that
have been glazed, caramelised or treated
with other additives containing sugar, since
they will block the brewing unit.
The water hardness setting can be adjusted
on this appliance. The factory setting for the
water hardness is 4. Check the hardness
of the water you use with the enclosed test
strip. If a value other than water hardness 4
is displayed, change the setting on the
appliance accordingly after switching on
(see “Menu settings – Water hardness”).
Setting up the appliance
Place the fully automatic espresso
machine on a at, water-resistant surface
that can take its weight.
Important: Only use the appliance in
frost-free rooms. If the appliance has been
transported or stored at temperatures below
0 °C, wait at least 3 hours before operation.
Pull out the mains plug from the cable
compartment 24 and plug it in. Adjust the
length of the cable by pushing it back in
and pulling it out. To do this, place the
appliance with its back ush with the edge
of the work surface and either pull the
cable downwards or push it upwards.
Lift the lid of the water tank 12.
Remove and rinse the water tank 11 and
ll it with fresh, cold water. Do not ll
above the “max” mark.
Replace the water tank 11 and push it
rmly downwards into place.
Close the water tank lid 12 again.
Fill the bean container 15 with coffee
beans.
Press the power switch 1 O / I. The start
button 8 lights up and the different lan-
guages appear in the display 5.
The following languages can be selected:
TE8.. DE
Deutsch English
Français Italiano
TE8.. RW
English Русский
Nederlands Français
Italiano Svenska
Español Polski
Українська Magyar
Türkçe Dansk
Norsk Suomi
Português Čeština
Ελληνικa
Use the buttons < and > 4 to select the
language in which you want the display
texts to appear.
Sprache
Deutsch
start
English
Français
The selected language is highlighted.
Press the start button 8. The language
you selected is saved.
The brand logo lights up in the display 5.
The appliance now heats up and rinses.
Some water will run out of the coffee
outlet 9.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EQ 8 series 600 - TE806201RW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EQ 8 series 600 - TE806201RW in the language / languages: English, Dutch, French, Polish as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info