790966

Siemens EM645CQB5M Manual

14
Zoom out
Zoom in
Previous page
1/24
Next page
en PowerBoost function
14
Once the time has elapsed
The hotplate switches off. A beep sounds and in the
time program function display ‹‹ appears for
10 seconds. The Ú indicator on the hotplate lights up.
Pressing the 0 symbol turns off the indicators and
stops the beeping.
Notes
■If a cooking time has been set for several hotplates,
the cooking time that was set last appears in the
timer display.
■To select the remaining cooking time for a different
hotplate, touch the 0 symbol repeatedly until the
indicator for the desired hotplate lights up.
■You can set a cooking time of up to 99 minutes.
The kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Setting procedure
1. The kitchen timer can be set in two different ways:
– If a hotplate has been selected, touch the
0 symbol repeatedly until the Ú indicator beside
the V symbol lights up.
– If no hotplate has been selected, touch the
0 symbol. The Ú indicator beside the V symbol
lights up.
‹‹ appears on the timer display.
2. Touch the @ or A symbol. The basic setting is
displayed.
@ symbol: 10 minutes.
A symbol: 05 minutes.
3. Use the @ or A symbol to set the required time.
After a few seconds, the time begins to count down.
Changing or deleting the time
Touch the symbol 0 repeatedly until the Ú indicator
lights up beside the V symbol. Change or set the time
to ‹‹ using the @ or A symbol.
Once the time has elapsed
A warning signal sounds. ‹‹ is displayed on the time
program function display. After 10 seconds the
indicators turn off.
Pressing the 0 symbol turns off the indicators and
stops the beeping.
vPowerBoost function
Po we r Bo o s t functi on
The PowerBoost function enables you to heat up large
quantities of water faster than when using heat setting
Š.
This function can always be activated for a hotplate,
provided the other hotplate in the same group is not in
use (see illustration). Otherwise, the › symbol and the
heat setting will flash in the hotplate display; the
previously selected heat setting will then be set
automatically without activating the function.
Note: In the combi zone, the PowerBoost function can
only be activated if the two hotplates are used
independently of each other.
Activation
1. Selecting the required heat setting.
2. Touch the & symbol for the selected hotplate.
› lights up on the display.
The function is activated.
Deactivation
Touch the & symbol.
› goes out on the display and the hotplate switches
back to the previously selected heat setting.
The function is deactivated.
Note: In certain circumstances, the PowerBoost
function can switch itself off automatically in order to
protect the electronic elements inside the hob.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EM645CQB5M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EM645CQB5M in the language / languages: English as an attachment in your email.

The manual is 2.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EM645CQB5M

Siemens EM645CQB5M User Manual - German - 16 pages

Siemens EM645CQB5M User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info