530665
10
Zoom out
Zoom in
Previous page
1/16
Next page
10
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Š.
Use limitations
This function may be used for all hotplates, provided that the
other hotplate in the same group is not turned on. (See figure)
Otherwise, the display for the selected hotplate will flash
and
Š; then it will automatically set the power level Š.
In Group 2, the Powerboost function may be activated at the
same time for all hotplates. (see diagram)
To activate
1.Select the power level Š.
2.Press the programming panel located above the @ symbol.
The function has been activated.
To turn off
Press the programming panel located above the @ symbol.
The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
as a timer.
Turning off a hotplate automatically
Enter the cooking time for the required hotplate. The hotplate
turns off automatically once the time has elapsed.
How to program
1.Select the required power level.
2.Press the 0 symbol of the desired hotplate. The hotplate
display shows
‹‹ and the indicator x comes on.
3.Select the required cooking time in the programming panel.
The possible previous setting is, from left to right 1, 2, 3, etc.,
up to 10 minutes. Within the next 10 seconds, continue
passing through the options in the programming panel until
reaching the desired time.
The cooking time will be displayed for 10 seconds then begin
to count down.
Automatic programming
If the previous setting from 1 to 5 is pressed in the
programming panel, the cooking time is reduced by one
minute, if it is held down the time is automatically reduced to
one minute.
If the previous setting from 6 to 10 is pressed in the
programming panel , the cooking time is increased by one
minute, if it is held down the time is automatically increased to
99 minutes.
Once the time has elapsed
The hotplate switches off. The beep sounds and the display
comes on
‹‹ for 10 seconds. The x indicator lights up.
Pressing the
0 symbol turns off the indicators and stops the
beeping.
Changing or cancelling the time
Press the
0 symbol of the desired hotplate. Change the
cooking time in the programming panel, or set to
‹‹.
Note: Any cooking time can be programmed up to 99 minutes.
Automatic timer
With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time of a hotplate may be cancelled or
changed:
Press the
0 symbol of the desired hotplate. Change the
cooking time in the programming panel, or set to
‹‹.
Timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. The hob must be switched
on. The timer can be set for any hotplate not turned on. This
function does not automatically switch off a hotplate.
How to program
1.Press the symbol 0 for the hotplate, the indicator W is
turned on.
‹‹ lights up in the time program function display.
2.Select the desired time in the programming panel.
The timer starts to count down after a few seconds.
*URXS
*URXS
*URXS
 
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EH975SZ11E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EH975SZ11E in the language / languages: English as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EH975SZ11E

Siemens EH975SZ11E User Manual - German, Dutch - 56 pages

Siemens EH975SZ11E User Manual - Danish - 52 pages

Siemens EH975SZ11E User Manual - French, Italian - 56 pages

Siemens EH975SZ11E User Manual - Polish - 16 pages

Siemens EH975SZ11E User Manual - Portuguese - 32 pages

Siemens EH975SZ11E User Manual - Swedish - 52 pages

Siemens EH975SZ11E User Manual - Spanish - 32 pages

Siemens EH975SZ11E User Manual - Norwegian, Finnish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info