530248
10
Zoom out
Zoom in
Previous page
1/16
Next page
10
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock.
The range must be turned off.
To activate: press and hold the
# symbol for approx.
4 seconds. The
@ symbol lights up for 10 seconds. The
range is locked.
To deactivate: press and hold the
# symbol for approx.
4 seconds. The lock is now deactivated.
Childproof lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
All of the relevant information on the automatic childproof lock
connection can be found in the Basic settings chapter.
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Š.
Restrictions when using
This function is available on all hotplates, provided that no other
zone in the same group is working (see diagram). Otherwise,
the
and Š symbols will flash on the selected hotplate display;
then the power level
Š will be automatically set.
On hotplate number 3, the Powerboost function can be
activated at any time.
Note: The Powerboost function can be activated in the flexible
zone when used as a single hotplate. In this case, place the
pan in the centre as shown in the Flexible zone section.
To activate
1.Select the power level Š.
2.Press the programming panel located above the @ symbol.
The function has been activated.
To turn off
Press the programming panel located above the @ symbol.
The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
as a timer.
Turning off a hotplate automatically
The zone turns off automatically once the selected time has
elapsed.
Programming the cooking time.
The hob must be switched on:
1.Select the hotplate and the desired power level.
2.Press the 0 symbol. The x indicator on the hotplate lights
up.
‹‹ is displayed on the time program function display. To
select another hotplate, press the
0 symbol several times
until the
x indicator for the desired hotplate lights up.
3.Within the next 10 seconds, select the desired cooking time
in the programming zone. The possible default setting is,
from left to right: 1, 2, 3, etc., up to 10 minutes.
After a few seconds, the cooking time begins to elapse.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
*URXS
*URXS
 
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EH975FE17E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EH975FE17E in the language / languages: English as an attachment in your email.

The manual is 2,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EH975FE17E

Siemens EH975FE17E User Manual - German, Dutch - 56 pages

Siemens EH975FE17E User Manual - Danish - 52 pages

Siemens EH975FE17E User Manual - French, Italian - 56 pages

Siemens EH975FE17E User Manual - Portuguese - 36 pages

Siemens EH975FE17E User Manual - Swedish - 52 pages

Siemens EH975FE17E User Manual - Spanish - 36 pages

Siemens EH975FE17E User Manual - Norwegian, Finnish - 52 pages

Siemens EH975FE17E Installation Guide - All languages - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info