530766
10
Zoom out
Zoom in
Previous page
1/16
Next page
10
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
as a timer.
Turning off a hotplate automatically
The zone turns off automatically once the time has elapsed.
Programming the cooking time.
The hob must be switched on:
1. Select the desired power level.
2. Press the 0 symbol. The indicator x for the switched on
hotplates lights up.
‹‹ is displayed on the time program
function display.
3. Within 10 seconds, select the cooking time with the control
disc for the desired hotplate.
After a few seconds, the cooking time begins to elapse.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
Changing or cancelling the time
Press the
0 symbol several times until the required indicator
x lights up with greater intensity. Change the cooking time
with the control disc in the programming panel, or set to
‹‹.
Once the time has elapsed
The hotplate switches off. An audible signal sounds and
‹‹
appears in the time program function display for 10 seconds.
The
x indicator lights up. Pressing the 0 symbol turns off the
indicators and stops the signal.
Notes
If a cooking time has been programmed for several
hotplates, it can be set to display all the time values. To do
this, press the
0 symbol several times until the x indicator
for the required hotplate lights up with greater intensity.
Any cooking time can be programmed for up to 99 minutes.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
1. Press the 0 symbol several times until the W indicator lights
up.
‹‹ is displayed in the time program function display.
2. Select the required time using one of the control discs.
The timer starts to count down after a few seconds.
Once the time has elapsed
A warning beep sounds. In the time program function display
‹‹ is shown, and the W indicator comes on. After 10 seconds
the indicators turn off.
Pressing the
0 symbol turns off the indicators and stops the
beep.
Changing or cancelling the time
Press the
0 symbol several times until the W indicator lights
up. Change the time using one of the control discs or set
to
‹‹.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
and
flash alternately.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
Cleaning lock function
Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
# symbol. A signal sounds. The control panel is
locked for 35 seconds. The surface of the control panel can
now be cleaned without risk of changing the settings.
Note: The lock does not affect the main switch. The hob may
be switched off when desired.
 
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EH885DC12E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EH885DC12E in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EH885DC12E

Siemens EH885DC12E User Manual - German, Dutch - 60 pages

Siemens EH885DC12E User Manual - Danish - 56 pages

Siemens EH885DC12E User Manual - French, Italian - 60 pages

Siemens EH885DC12E User Manual - Polish - 20 pages

Siemens EH885DC12E User Manual - Polish - 16 pages

Siemens EH885DC12E User Manual - Portuguese - 32 pages

Siemens EH885DC12E User Manual - Swedish - 56 pages

Siemens EH885DC12E User Manual - Spanish - 32 pages

Siemens EH885DC12E User Manual - Norwegian, Finnish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info