641052
17
Zoom out
Zoom in
Previous page
1/20
Next page
17
Demo mode
If the “Demo“ symbol appears in the display, the demo mode
is activated. The appliance does not heat up. Disconnect the
appliance from the power supply. Wait a few seconds and
reconnect it. Then switch off the Demo mode in the Options
menu within the first 3 minutes.
Info button
With the Info button, you can request important additional
information on the function currently being used. To call up the
information, touch the
±display area. The information appears.
To close the Information, touch the
± display area.
Normal operating noise of the cooktop
Induction technology is based on the generation of
electromagnetic fields. These allow heat to be generated
directly on the base of the cookware. Pots or pans can cause
different noises or vibrations depending on the manufacturing
method. These noises are described as follows:
Deep buzzing (as from a transformer)
This noise occurs when cooking on higher power levels. It is
due to the volume of energy transferred from the cooktop to the
cookware. The noise stops or reduces when the power level is
reduced.
Low whistling
This noise occurs if the cooking container is empty. It stops
when water or food is placed in the container.
Crackling
This noise occurs with cookware made of different multilayer
materials. It occurs because of vibrations at the areas at which
the different materials contact each other. The noise occurs on
the cookware and can vary according to the volume and
preparation method of the food.
Loud whistling
This noise occurs for cookware made of different multilayer
materials if they are also used on the maximum power level and
on two cooking positions at the same time. The noise stops or
reduces when the power level is reduced.
Fan noises
For correct operation of the electronic system, the cooktop
temperature must be regulated. To do this, the cooktop is
equipped with a cooling fan which is operated to reduce and
regulate the temperature of the electronic system. The fan can
also continue to run when the appliance is switched off, if the
temperature measured after switching the cooktop off is still too
hot.
The above-mentioned noises are a normal part of induction
technology and should not be considered as a defect.
After-sales service
Our after-sales service is there for you if your appliance should
need to be repaired. We are committed fo find the best solution
also in order to avoid an unnecessary call-out.
E number and FD number:
Please quote the E number (product number) and the FD
number (production number) of your appliance when
contacting the after-sales service. The rating plate bearing
these numbers can be found on the appliance certificate.
Please note that a visit from an after-sales service engineer is
not free of charge, even during the warranty period.
Please find the contact data of all countries in the enclosed
customer service list.
To book an engineer visit and product advice
Trust the expertise of the manufacturer, and rest assured that
the repair will be carried out by trained service technicians
using original spare parts for your domestic appliance.
,QIRUPDWLRQ
7RFKDQJHWKHSRZHUOHYHOWRXFKWKHQXPEHUVDQGVOLGH\RXU
ILQJHUXSRUGRZQ
GB 0844 8928999
Calls from a BT landline will be charged at up to
3 pence per minute. A call set-up fee of up to 6 pence
may apply.
IE 01450 2655
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EH875KU12E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EH875KU12E in the language / languages: English as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EH875KU12E

Siemens EH875KU12E User Manual - German, Dutch, French, Italian - 68 pages

Siemens EH875KU12E User Manual - Portuguese, Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info