641052
11
Zoom out
Zoom in
Previous page
1/20
Next page
11
When the cooking time has elapsed
When the cooking time has elapsed, the cooking position
switches off. A signal sounds. 00:00
min
and power level 0.0 light
up in the hotplate display.
Note: You can set a cooking time of up to 9 hours and
59 minutes. Depending on the power level set, the cooking
position may also switch off before the cooking time has
elapsed. See section Safety shut-down.
To correct the cooking time: touch the
xsymbol and reset the
cooking time.
To delete the cooking time: touch the
x symbol and reset to
00
h
00
min
.
Safety shut-down
If a cooking position is in use for a long time without the
settings being changed, the safety shut-down is activated.
The cooking position switches off.Cooking position in use for
too long” appears in the display. Touch the
±symbol. The
display goes out. You can make new settings.
When the safety shut-down is activated depends on the power
level which has been set. For more information, see section
Resolving malfunctions.
Transferring settings
Short-term memory
As soon as you lift the cookware or move it on the cooktop, all
settings of the cooking position are saved for a short time (10-
90 seconds). The cooking position does not heat.
Note: For the duration of the short-term memory, you can
change the settings of the cooking position (exception:
powerBoost function and timer).
Place the cookware back onto the same position within the
duration of the short-term memory. The settings are
automatically applied. The cooking position heats up.
Notes
If the position differs significantly from the original position,
use the transfer function
To find out how to change the duration of the short-term
memory, see section Options menu.
Transfer function
With this function, you can transfer the settings of one hotplate
to another cooking position.
1. Place the cookware at another position on the cooking
surface within the duration of the short-term memory. The
new cooking position is detected.
Note: The transfer function is no longer available if you:
make a setting in the meantime (exception: settings on the
cooking position with short-term memory)
move the cookware again
2. Touch the 6symbol. The settings have been transferred.
Note:
If this symbol appears in the cooking
position display, the settings could not
be transferred fully. Lift the cookware or
move it on the cooking surface. Make
the settings for the cooking position
again.





PLQ


P
LQ




PLQ

11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EH875KU12E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EH875KU12E in the language / languages: English as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EH875KU12E

Siemens EH875KU12E User Manual - German, Dutch, French, Italian - 68 pages

Siemens EH875KU12E User Manual - Portuguese, Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info