530250
7
Zoom out
Zoom in
Previous page
1/20
Next page
7
Residual heat indicator
The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching them when this
indicator is lit.
Although the hob is switched off, the indicator
œ or will
remain on for as long as the hotplate is hot.
If the pan is removed before the hotplate is turned off, the
indicator
œ or and the selected power level will appear
alternately.
Programming the hob
This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.
Turning the hob on and off
The hob is turned on and off using the main switch.
To turn on: Press the
# symbol. A beep sounds. The indicator
located next to the main switch and the
indicators of the
hotplates light up. The hob is ready for use.
To turn off: press the
# symbol until the indicators go out. All
hotplates are turned off. The residual heat indicator will remain
lit until the hotplates have cooled down sufficiently.
Notes
The hob switches off automatically when all the hotplates are
switched off for more than 20 seconds.
The settings are memorised for 4 seconds after the hob has
been turned off. If the hotplate is switched back on within this
time then the previous settings will be applied.
Setting the hotplate
The desired power level is set in the programming panel.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.
Selecting the hotplate and the power level
The hob must be switched on.
1. Select the hotplate with the ° symbol.
The
¬ symbol lights up in the display.
2. Within the next 10 seconds, slide a finger over the
programming zone until the desired power level lights up.
The power level has been set.
Changing the power level
Select the hotplate and set the desired power level in the
programming zone.
Switch off the hotplate
Select the hotplate and set it to
in the programming panel.
The hotplate turns off and the residual heat indicator appears.
Notes
If no pan has been placed on the hotplate, the selected
power level flashes. After a certain time has elapsed, the
hotplate switches off.
If a pan has been placed on the hotplate before switching on
the hob, it will be detected within 20 seconds of pressing the
main switch and the hotplate will be selected automatically.
Once detected, select the power level within the next
20 seconds or the hotplate will switch off.
If more than one pan is placed on the hob, only one will be
detected when switching it on.
Cooking guidelines table
The table below contains some examples.
Cooking times depend on the power level, type, weight and
quality of the food. As such they are approximate.
When heating purées, creams and thick sauces, stir
occasionally.
Use power level 9 to begin cooking.
 
Power level Cooking time
Melting
Chocolate, chocolate coating 1-1. -
Butter, honey, gelatin 1-2 -
Heating and keeping warm
Stew (e.g., lentils) 1.-2 -
Milk** 1.-2. -
Sausages heated in water** 3-4 -
* Uncovered cooking
** Uncovered
*** Turn frequently
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EH875FM27E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EH875FM27E in the language / languages: English as an attachment in your email.

The manual is 2,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EH875FM27E

Siemens EH875FM27E Quick start guide - English - 2 pages

Siemens EH875FM27E Quick start guide - German - 2 pages

Siemens EH875FM27E User Manual - German - 68 pages

Siemens EH875FM27E Quick start guide - Dutch - 2 pages

Siemens EH875FM27E User Manual - Dutch - 68 pages

Siemens EH875FM27E User Manual - Danish - 2 pages

Siemens EH875FM27E User Manual - Danish - 64 pages

Siemens EH875FM27E Quick start guide - French - 2 pages

Siemens EH875FM27E User Manual - French - 68 pages

Siemens EH875FM27E Quick start guide - Italian - 2 pages

Siemens EH875FM27E User Manual - Italian - 68 pages

Siemens EH875FM27E User Manual - Portuguese - 36 pages

Siemens EH875FM27E Quick start guide - Swedish - 2 pages

Siemens EH875FM27E User Manual - Swedish - 64 pages

Siemens EH875FM27E User Manual - Spanish - 36 pages

Siemens EH875FM27E Quick start guide - Norwegian - 2 pages

Siemens EH875FM27E User Manual - Norwegian - 64 pages

Siemens EH875FM27E User Manual - Finnish - 2 pages

Siemens EH875FM27E User Manual - Finnish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info